Ebeco (http://www.ebeco.co.uk/) has been around for ages. It's a twin-core system (single core ones are the ones that are a pain to fit as they need to be connected at both ends of the cable / cable-mat to make the circuit). They haven't updated the cable I believe. I had reports back saying it was a bit stiff (would keep it's rolled up shape a little while you're laying it).
Ebeco were not actually that big in the UK only 6 or 7 years ago. A company in Nottingham (Floor Heating Systems - now Varme) were the main suppliers of it and they chose to get their own cable made in the end.
It's prices to me were ok but I got better in the end from a scottish manufacturer (Flexel International) who supply Ebeco with their carbon film heating.
Gaz, you'll need to get clued up on the carbon "foil" heating mats that go under laminate if they stock laminate and shift the carbon. Though you'll be sound if they sell just the cable and cable mats, it's all the same really.
Slightly different thicknesses, slightly different make-up in the cables.
It's always the stats that do the job.
Heatmiser is a cheap brand you can get as a trader if you shift a lot of the stuff. Though the Aube thermostats you'll find are the ones that Flexel, Varme and many of the others decide to use rather than making their own or re-branding and existing one.
Tilers Forums is the UK's largest wall and floor tiling forum. Advice is provided free of charge to all users. Tilers Forums does not take responsibility for any loss or damage caused due to following advice found on this forum. All wall and floor tiling should be carried out by a qualified wall and floor tiler. Views expressed on this forum are of the users and not Tilers Forums. Views expressed on this tiling forum are of the contributor only and not the forum as a whole. Not all views should be taken as fact but simply the opinion of the person posting. Readers are reminded to seek professional advice before undertaking any wall and floor tiling project.