B&q Porcelain

[brian c]

pmsl SIMON,NAUGHTY BOY BUT QUITE RIGHT M8.

Stay clear from b&Q TILES AS THE GUYS SAY THEY DONT GUARANTEE CALIBRATION OR SHADING.Imust say the white ones seem to be the worst especially shading.

Those porcelain tiles need sealed as they are very porous and a porcelflex adhesive used.

[Dave]

porcelain tiles are sealed to make cleaning easier because dirt/stains gather in the tiles suface pores....Porcelain tiles are actually not very porous at all..they are a vitrified tile thus meaning glass like so Porcelain tiles usually have a much lower water absorption rate (less than 0.5%).....

[howard]

hi guys only done 1 job with b&q tiles they were white i did not have a problem with them check my pictures out in the gallery i found them ok to work with everybody on here slags b&q tiles off surely they are not all bad tiles b&q would have loads of complaints and do something about it they are a massive company so why would they allow this from there supilers

[smokie899]

just layed 36 sq met. in my own house. new house spent a fortune on it first timer so starting from scratch. i seen the price of them about £10 sq met.600x600. could not resist as i am a tiler i took a chance as i could work on themto get the best finnish and guess what they were all the exact same size. could not believe it but they are VERY POURUS. seal several times. good luck

[olgit]

maybe the only way is the old brick patern move ??

[brian c]

Originally Posted by smokie899

just layed 36 sq met. in my own house. new house spent a fortune on it first timer so starting from scratch. i seen the price of them about £10 sq met.600x600. could not resist as i am a tiler i took a chance as i could work on themto get the best finnish and guess what they were all the exact same size. could not believe it but they are VERY POURUS. seal several times. good luck

Thank goodness i have someome else who has the same opinion of these tiles as myself and Reaper72,these tiles need sealed please beleive me.I know what you are implying DH but these tiles need to be sealed especially the edges,this is my opinion btw.

I beleive its something to do with the polishing process opening up the pores.

[Dave]

I didnt say they didnt need sealing bri...but porcelain tiles are a vitrfied tile and thus are not porous......the staining is only surface......all be it hard to remove...

[Grace'sDad]

Originally Posted by howard

hi guys only done 1 job with b&q tiles they were white i did not have a problem with them check my pictures out in the gallery i found them ok to work with everybody on here slags b&q tiles off surely they are not all bad tiles b&q would have loads of complaints and do something about it they are a massive company so why would they allow this from there supilers

Fair comment but I believe B&Q insist all their suppliers accept returns on a no-quibble basis. The company I used to sell for refused to supply B&Q because of their demands regarding returns.

[brian c]

Originally Posted by dhceramics

I didnt say they didnt need sealing bri...but porcelain tiles are a vitrfied tile and thus are not porous......the staining is only surface......all be it hard to remove...

Fair comment Dave,i was begining to doubt myself for a minute,lol

[howard]

yeah your right on that my dad worked in a wallpaper factory and had the same problem with them

[Man4Hire]

Hi,

have just laid 25sq meters of the black 400 x 400 Band q tiles. they were all good sizes, no apparent variation and no warping.
Did need porcelain sealer, which B and q don't sell and they don,t sell a decent black grout or reasonably priced adhesive.
Did look good when finished though!

[IvegotsTILE]

All I will say is look at their displays,theirs only 4 tiles per display and if you look 9 times out of 10 there different sizes.What does that say for them?