Tile Forums Tiling, Wall Tiling, Floor Tiling, Forum
Go Back   TilersForums.co.uk | Tile Forums | Tiling Forum > Tile Forums | Tiling Forums | Tilers Forum > Tiling Forum
Forgot Password? Join Us!

Notices

Tiling Forum Tiling ForumDiscussions on all aspects of tiling & installing tiles in the tiling forum.

Reply
 
LinkBack Thread Tools Display Modes
Old 27-01-2008   #1
Tilers Forums Arms Member
Points: 2,011, Level: 27 Points: 2,011, Level: 27 Points: 2,011, Level: 27
Activity: 9% Activity: 9% Activity: 9%
 
JIMBOB187's Avatar
 

Join Date: Dec 2007
Posts: 217
Thanks: 57
Thanked 22 Times in 12 Posts
JIMBOB187 is on a distinguished road
View JIMBOB187's Photo Album
Default 110v-240v advice needed

Morning all, hopefully I am not about to make myself look stupid again but I need advice on the following.

I am due to start on a new build site next month and have been told I cannot use 240v, which is what my wet saw runs off. Do I or can I buy a generator with some sort of lead or adaptor to run the cutter off. Any advice greatly appreciated.

JIMBOB187 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

This is an Adsense Revenue Sharing Forum.
Old 27-01-2008   #2
Ex Pro Tiler
 
BetHiLow Streak Un-Censored Champion! BMX Park Champion!
Join Date: Apr 2007
Location: Darwen
Posts: 6,490
Thanks: 791
Thanked 511 Times in 366 Posts
GazTech has a spectacular aura aboutGazTech has a spectacular aura aboutGazTech has a spectacular aura about
View GazTech's Photo Album
Default Re: 110v-240v advice needed

[quote=JIMBOB187;51342]Morning all, hopefully I am not about to make myself look stupid again but I need advice on the following.

I am due to start on a new build site next month and have been told I cannot use 240v, which is what my wet saw runs off. Do I or can I buy a generator with some sort of lead or adaptor to run the cutter off. Any advice greatly appreciated.:thumbsup:[/quote]Not a silly question, this is what you need, any 110v power tool will run from it...PS my other post ,I did not mean to belittle you....we all start somewhere....Gaz
[URL="http://www.airlinktransformers.com/prodpics/377-2lgr.jpg"][IMG]http://www.airlinktransformers.com/prodpics/377-2lg.jpg[/IMG][/URL] [B]RX1 : 1kVA Safety isolation portable tool transformer[/B]


[B]RX1 : 1kVA Safety isolation portable tool transformer
230V to 110V (16amp)[/B]

Safety isolation portable tool transformer 1kVA
Input 230V
Output 110V

This 110V transformer is for use on building sites running a reduced low voltage system.

Price for 1+: £26.01 each. Price for 5+: £24.39 each. Price for 25+: £22.76 each. Weight: 11 kg. VA: 1000 VA.[LIST][*]Intermttent rating 1000VA[*]Input 1 x 230V BS 1363 13Amp plug[*]Outlet 1 x 110V 16A BS4343 socket[*]Housed in durable, reinforced, weatherproof fibreglass case.[*]Dimensions: 290 x 200 x 240mm[*]Conforms to BSEN61558 & BS4343[*]Made in China[*]Continuous rating 700va[/LIST]

[B]"[I][COLOR=darkgreen]The bitterness of poor quality remains long after the sweetness of low price is forgotten[/COLOR][/I]"[/B]
GazTech is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 27-01-2008   #3
TF Mod & Head Grinch


 
Sir Ramic's Avatar
 

Join Date: Jan 2008
Location: Stourbridge, West Midlands
Posts: 2,228
Thanks: 97
Thanked 282 Times in 187 Posts
Sir Ramic is a jewel in the roughSir Ramic is a jewel in the roughSir Ramic is a jewel in the rough
View Sir Ramic's Photo Album Send a message via MSN to Sir Ramic
Default Re: 110v-240v advice needed

You could buy a generator but you still wont be able to use it on site. 110volt means just that.
When replacing tools from now on, always go for the 110 option. All you need then is a transformer when you go on private work.
Sir Ramic is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 27-01-2008   #4
Tilers Forums Arms Member
Points: 2,011, Level: 27 Points: 2,011, Level: 27 Points: 2,011, Level: 27
Activity: 9% Activity: 9% Activity: 9%
 
JIMBOB187's Avatar
 

Join Date: Dec 2007
Posts: 217
Thanks: 57
Thanked 22 Times in 12 Posts
JIMBOB187 is on a distinguished road
View JIMBOB187's Photo Album
Default Re: 110v-240v advice needed

[quote=Gaz @ Topps;51343]Not a silly question, this is what you need, any 110v power tool will run from it...PS my other post ,I did not mean to belittle you....we all start somewhere....Gaz


Thanks mate appreciate it, and regarding the other post I did feel a bit stupid but after reading it again I realised I was stupid and it highlighted my inexperience and obvious areas I need to research more.
JIMBOB187 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 27-01-2008   #5
TF Mod & Head Grinch


 
Sir Ramic's Avatar
 

Join Date: Jan 2008
Location: Stourbridge, West Midlands
Posts: 2,228
Thanks: 97
Thanked 282 Times in 187 Posts
Sir Ramic is a jewel in the roughSir Ramic is a jewel in the roughSir Ramic is a jewel in the rough
View Sir Ramic's Photo Album Send a message via MSN to Sir Ramic
Default Re: 110v-240v advice needed

Personally i would advise a 3KVA transformer with 2 outlets, it always comes in useful. Cost about £60 ish
Sir Ramic is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 27-01-2008   #6
pjc
TilersForums Trusted Member

Points: 4,538, Level: 42 Points: 4,538, Level: 42 Points: 4,538, Level: 42
Activity: 34% Activity: 34% Activity: 34%
 
pjc's Avatar
 

Join Date: Oct 2007
Location: high wycombe
Posts: 1,438
Thanks: 11
Thanked 50 Times in 46 Posts
pjc will become famous soon enough
View pjc's Photo Album Send a message via Skype™ to pjc
Default Re: 110v-240v advice needed

Jim 110v power is provided on site from a larger transformer you need 110v tools leads are usually provided i always buy 110v tools and have a transformer as above for private work if you buy a transformer do make sure its powerful enough for what you may need in the future :Pete
pjc is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 27-01-2008   #7
TF Mod & Head Grinch


 
Sir Ramic's Avatar
 

Join Date: Jan 2008
Location: Stourbridge, West Midlands
Posts: 2,228
Thanks: 97
Thanked 282 Times in 187 Posts
Sir Ramic is a jewel in the roughSir Ramic is a jewel in the roughSir Ramic is a jewel in the rough
View Sir Ramic's Photo Album Send a message via MSN to Sir Ramic
Default Re: 110v-240v advice needed

Dont rely on the site providing leads or lights. If you take your own, mark them clearly because they have a habit of walking.
Sir Ramic is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 27-01-2008   #8
Tilers Forums Arms Member
Points: 874, Level: 15 Points: 874, Level: 15 Points: 874, Level: 15
Activity: 0% Activity: 0% Activity: 0%
 
bencurtis's Avatar
 

Join Date: Nov 2007
Posts: 63
Thanks: 0
Thanked 1 Time in 1 Post
bencurtis is on a distinguished road
View bencurtis's Photo Album
Default Re: 110v-240v advice needed

if you check the law im sure it says you can use 240v but you must have a hard wired rcd. there was a case that went to court a while back. i still think you would struggle to get 240v on site, hope that helps
bencurtis is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 27-01-2008   #9
Unregistered
Guest
 
Tournaments Won: 1

Posts: n/a
View Unregistered's Photo Album
Thumbs down Re: 110v-240v advice needed

Perhaps we could now answer the question posed.

Jimbob was asking if he could use his 240v wet cutter on site. Gaz has provided a picture of a device that would convert domestic power to commercial. The picture has a domestic plug on and states input 230v, output 110v. The complete reverse to what has been asked.

Jimbob - there are devices available which would do what you require; called inverters and they convert site plugs to something you could use with your existing wet cutter.

I don't know if these would be permissable on sites as it is normal to work at 110v on site, so I'm not going to even try and answer that, but hopefully the above answers your original question posed.
 
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 27-01-2008   #10
TilersForums Trusted Member

Points: 13,477, Level: 75 Points: 13,477, Level: 75 Points: 13,477, Level: 75
Activity: 100% Activity: 100% Activity: 100%
 
whitebeam's Avatar
 

Join Date: Apr 2007
Location: Hertfordshire
Posts: 3,539
Thanks: 159
Thanked 444 Times in 375 Posts
whitebeam will become famous soon enough
View whitebeam's Photo Album
Default Re: 110v-240v advice needed

Quote:
Originally Posted by Sir Ramic View Post
Dont rely on the site providing leads or lights. If you take your own, mark them clearly because they have a habit of walking.
Agree with the above, Also last time I was on a housing site nearly every trade had their own generator, So be prepared to buy one.

whitebeam is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Bookmarks

Tags
110v240v, advice, needed
Discuss 110v-240v advice needed at the Tiling Forum within the TilersForums.co.uk | Tile Forums | Tiling Forum; Morning all, hopefully I am not about to make myself look stupid again but I ...
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Career change - advice needed steg90 Tiling Courses 20 01-08-2008 04:41 PM
Advice needed. gm renovations Tiling Forum 6 31-01-2008 08:51 PM
Advice needed - Laying ceramic tiles on a (Lino)floating floor Sparkler Tiling Forum 8 29-09-2007 05:52 PM

Google Search

All times are GMT. The time now is 03:34 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.2.0 RC8



Looking for a tiler?
Post Your Tiling Job HERE for FREE!
----------

COMMUNITY SPONSORS

Manufacturers
Drill Porcelain Tile - 365Drills

Mapei Tile Adhesive

Perfect Silicone Joints - Supporting the Tile Forum

Rubi Tiling Tools : Sponsors of the Tiling Forum

Schluter Systems

Suppliers
Tiling Tools by Trade Tiler  Forum Sponsors of Tiling Tools

CTD Tiles & TILE Base; Tilers Forum Sponsors

Quality Wetroom Solutions

Electric Underfloor Heating by UHeat

General Sponsors

TSJ - Tile and Stone Journal - THE Tile & Stone Journal

Tile UK Magazine

Traders Liability Insurance - Liability Insurance for Tilers

Find Trusted Tradesmen

Sponsor Tilers Forums - The UK's Biggest Tile Forum / Tile Forums

Tiling Courses
Tiling Courses by NETT

Plastering Courses

Tiling Courses by Chase Tiling Academy

Plumbing Courses by Chase Plumbing Academy

Tiling Courses by Diamond Training Centre

Plastering Courses by Diamond Training Centre

Tiling Courses by Able Skills

Tiling Courses by Tiler Training School

Construction Courses by ConstructionSkills College Limited

Move to Australia!

Yorkshire Tiling Academy

Our sponsors keep the forum free to use, please click their banners (above) and use the sponsors when you can. Some offer special rates to forum members too.

OTHER LINKS

Top Forums
Tile Forums
US/CA Tile Forums
Spanish Tiles
OZ Tile Forums
Tiling Tools
Tiling Courses
Tile Adhesives


[Output: 117.02 Kb. compressed to 110.32 Kb. by saving 6.70 Kb. (5.73%)]

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103