Adhesive Advice

[ninemill]

Just started tiling my bathroom floor using Vitraflex rapid set flexible adhesive and unfortunately I've come to the end of the bag and only have about 65% of the floor down. The adhesive & tiles came from a friend of the family who lives some distance away and Vitraflex doesn't seem to be stocked round here. Am I OK using a different type of adhesive for the rest of the floor or should I wait until I can get some matching adhesive delivered? Floor is upstairs bathroom WBP plywood with underfloor heating and SLC on top.

Thanks,

Tom.

[Mike]

i can't see that being a problem, i've mixed adhesives with no problems. just make sure it's flexi again

[ninemill]

Thanks Mike. This is the stuff I've been using: http://www.bostik.co.uk/construction/product/bostik/Bostik-Vitri-Flex/243

I can get any of the Mapei stuff without too much trouble I think, would standard KeraFlex be OK?

[ninemill]

I can get hold of Mapei stuff locally without any trouble, would standard KeraFlex be OK?

[ninemill]

Or Buildfix Single Part Super Flexible?

[kilty55]

yes how thick is the ply btw

[ninemill]

It's 18mm think.