Recommendation: Laying Marmox floor boards on plywood.....

[davemul]

Hi guys

ill be very soon Laying Marmox floor boards on plywood.....

what size / type trowel would you recommend? and I assume a std powdered mapei flexible adhesive (keraflex) will do the job!?

thanks

Dave

[Dave]

6mm trowel.. and adhesive flexi IMO..


Suitable screws and marmox washers,marmox say you can just stick them down on floors but i like to mechanical fix as well.

[davemul]

Great stuff, thank you Dave I imagine screw down once adhesive has set ?

[Dave]

You can do it as you go..

[Stewart]

As Dave has said for installation and I get the apprentice to screw them as I stick them....


---
- Created on iPhone.....

[davemul]

thanks gents

[davemul]

cool, I had to take my showerstone tray back for another so I swapped the metal washers for plastic, bought some stainless screws and replaced the 4mm boards with 6mm ones. Picked up some S1 keraflex so i'm good to go!

[John the tile]

Hello,

how much you been paying for the 6mm boards, and the plastic washers and screws... ? Where did you get them from?

ta

[davemul]

6mm boards were about £8 each. Can only buy packs, 8 in each pack.

100 washers were about 11 quid

screws, I got stainless turboscrews from screwfix about a fiver for 200

marmox silicone is about £4 a tube

[John the tile]

nice, where from? I only need three? but could store some as i think i could use them in a few months time...