polished concrete ??

[davebates]

hi guys got a job in today been to measure and have a look roughly 9m2 and the customer says half is normal concrete and the other half is granite which i beleave to be polished concrete they have bought 500X500 cream porcelains, he says hes had problems with tiles sticking to the polished concrete over the years whats the best way to attack this i was thinking primer g and keraquick any thoughts ???????

[Dave]

Rough up the polished section (60 grit) then slurry coat and then tile, no probs

[Colour Republic]

Mainly polished concretes floors have a varnish applied after which is why they may have had problems (if it is PC).

What makes you think it's polished concrete and not granite , both look very different

[davebates]

cheers dave!! what mix would you use ??

[davebates]

didnt think it would be a solid granite floor it this possible when the house was built ??

[Dave]

cheers dave!! what mix would you use ??

Make sure you abrade the floor well and then 50/50 sbr/rapidset slurry just to make sure of the best adhesion

[Rob Z]

It's slower, but a sure thing, to use a bush hammer bit in an electric demo hammer, and abrade the surface that is polished or sealed.

[Ajax123]

Scabble the polished concrete then overlay it with levelling compound if necessary.

[davebates]

scabble ??

[whitebeam]

One of these HSS Hire - Multi-Head Floor Scabbler Hire and Rent

[davebates]

hhmmmm its only 2 m2 and at £250 a day i think ill sand it

[whitebeam]

Oh 2m2, see your point, thought it was a lot more.

[davebates]

its 8 m2 floor in a kitchen but 6m2 is the extension on normal concrete but the original kitchen floor is polished concrete or granite