Montolit episode 3 the final cutter

[Barry bp]

I tried a porc tile in my new p63 that my nxt900 couldnt cut it cut it easy im upset that i didnt buy this cutter years ago some bathrooms i have wet cut the whole room because Rubi couldnt cut.The Montolit is soooo much better design weight guide stop flips up very useful.If there was one piece of advise i could give to anyone phone Dave at Tradetiler and get a Montolit you will hopefully think of me and thank me every day!
Havent tried on mosaic yet Scot but expect it to be good
Whitebeam get a Montolit!

PS anyone want a cheap 900nxt i want the 93 now

[aph257]

i've been saying Monti's are better the Rubi's for ages.

[Dave]

i've been saying Monti's are better the Rubi's for ages.

I have a monty and on some tiles the TX is a lot better.. which the member above will find out..

[nybor62]

next step sigma c,mon you know you want to it wont hurt

[Barry bp]

I have a monty and on some tiles the TX is a lot better.. which the member above will find out..

Thanks Dave its nice to have a choice of cutter when finding a hard tile to cut

[Dave]

Sure is, keep the TX as well IMO..

[Barry bp]

next step sigma c,mon you know you want to it wont hurt

I think you have to be brought up on a Sigma

[doug boardley]

well I've got a 25m2 quarry tile floor to start tomorrow, guess it's scribe and pein hammer job, no rubi, sigma or monti for them beggars

[Dave]

why.?.. of course they cut fine on a rubi or monty.. Hit the handle harder,,

[nybor62]

i learnt on rubi , but i learned form my mistakes

[doug boardley]

why.?.. of course they cut fine on a rubi or monty.. Hit the handle harder,,

Dave, you've seen the size of me, more likely to snap my arm

[aph257]

i did a 20sq m kitchen in quarry late last year and the Monti cut 'em perfect

[Sir Ramic]

well I've got a 25m2 quarry tile floor to start tomorrow, guess it's scribe and pein hammer job, no rubi, sigma or monti for them beggars

Eh ? my sigma would eat those for breakfast.

[doug boardley]

come to think of it, I've never tried cutting quarries on it, must be about 10 years since I've done any!

[doug boardley]

come to think of it, I've never tried cutting quarries on it, must be about 10 years since I've done any!

yep, cut them no probs

[karlm98]

Eh ? my sigma would eat those for breakfast.

i,m with Sir Ramic on this one....Sigma all the way..the new breaker system on the sigma 3cm has 1200kg pressure and the wheel gives really fine edges on the cut.

also you can use your rubber mallet with the Monti give it a whack after you have set up the handle depth..it will cut what ever you put under it..hahaha Monti's rock but sigma's rock harder..lol

[andy8758]

I tried a porc tile in my new p63 that my nxt900 couldnt cut it cut it easy im upset that i didnt buy this cutter years ago some bathrooms i have wet cut the whole room because Rubi couldnt cut.The Montolit is soooo much better design weight guide stop flips up very useful.If there was one piece of advise i could give to anyone phone Dave at Tradetiler and get a Montolit you will hopefully think of me and thank me every day!
Havent tried on mosaic yet Scot but expect it to be good
Whitebeam get a Montolit!

PS anyone want a cheap 900nxt i want the 93 now

Good luck with your Montolit. I bought one and found it was hopeless with porc, with no case it was a problem to transport, and the cutting wheels were limited to say the least - oh and I could not see pencil marks without leaning to one side! Bought a Rubi TX and never had a problem since!!

We should have swapped cutters!

[Gall.B]

How much was the p63 m8 im looking for a new 750 and something small, selling my sigmas. was swayed the tomecanic supercoups but they dont do a mini. keep hearing good stuff about the montys

[Mike]

come to think of it, I've never tried cutting quarries on it, must be about 10 years since I've done any!

same here doug, last one i done was heather brown (seconds) can't remember what cutter i used it was so long ago

[astute1]

Ive just ordered a monti 63p. looking forward to getting it. Have owned a sigma for 10 yrs and have been pleased with it, but like the look of the extra features the monti provides. ie the flip up slide bar, and the strike adjustment on the strike bar so you cant damge the side of your tile. I am hoping the monti will cut as well and these added features will be a bonus. will give some feed back after the new cutter arrives.

[Barry bp]

Ive just ordered a monti 63p. looking forward to getting it. Have owned a sigma for 10 yrs and have been pleased with it, but like the look of the extra features the monti provides. ie the flip up slide bar, and the strike adjustment on the strike bar so you cant damge the side of your tile. I am hoping the monti will cut as well and these added features will be a bonus. will give some feed back after the new cutter arrives.

I know you will be pleased did you order from TT?

[andy-p]

I have a monty and on some tiles the TX is a lot better.. which the member above will find out..

i have a monty and tx and a sigma too , theirs very few tiles that the tx cuts better than the monty , maybe 1 or 2 ive came across so far , its good to have the tx as a backup but the monty is the better machine ..

[astute1]

Thanks for the feedback andy, yeah it looks like a goodn. Looking forward to it arriving

[astute1]

Hi Barry

Thanks for your reply, no didnt get it from tile trader as I live in NZ. Have got direct from the local importers though so I think I got a good price. Am talkiing to T T though about shipping a dewalt 24000 wet saw down to me though ,

[Barry bp]

Hi Barry
Thanks for your reply, no didnt get it from tile trader as I live in NZ. Have got direct from the local importers though so I think I got a good price. Am talkiing to T T though about shipping a dewalt 24000 wet saw down to me though ,

You wont regret Monti or the Dewalt if you go for it good luck

[astute1]

Got the Monolit 63P last week and am totally stoked with the purchace. My old Sigma has served me well and I would never say a bad thing about them but this new machine is very nice, very smooth and cuts very well, So I am super pleased.

[Mike]

Got the Monolit 63P last week and am totally stoked with the purchace. My old Sigma has served me well and I would never say a bad thing about them but this new machine is very nice, very smooth and cuts very well, So I am super pleased.

i have the same one (masterpuima 63 p2) for sale on ebay if anyone's interested. montolit masterpima 63 p2 | eBay UK

[karlm98]

i have the same one (masterpuima 63 p2) for sale on ebay if anyone's interested. montolit masterpima 63 p2 | eBay UK

why are you selling it?

[Mike]

my mate owns it. he decided to go self employed as a tiler but it never worked out. tbh he aint got much go in him. i would have bought it off him but i've just bought a sigma.

[jay]

my mate owns it. he decided to go self employed as a tiler but it never worked out. tbh he aint got much go in him. i would have bought it off him but i've just bought a sigma.