LTP Sealers

[Rich]

Hello all, I wanted to put up a little bit of info on LTP sealers to go with the post I put up the other day on surface types. I will add a link to this post at the bottom of this one. All LTP products can be bought or ordered at any Tile Giant store.

This is the second time I have typed out this post but I deleted it by mistake

LTP Ironwax Primer



For use on thick and extremely absorbant floors and terracotta before finishing with LTP Ironwax Satin or LTP Ironwax Gloss. Facilitates a good adherence of LTP Ironwax Satin and LTP Ironwax Gloss.
(1 and 5 litre containers)

LTP Ironwax Gloss (Interior Use Only)



This tough ionised acrylic gloss sealer hes been specially formulated to minimise maintenance of porous quarry tiles, terracotta, brick, slate, stone, terrazzo, unpolished marble and cement floors. LTP Ironwax Gloss may be used as a wax protector to strengthen the seal offered by non silicone waxes. Maintain with LTP Floorshine.
N.B On more porous surfaces pre-seal with LTP Ironwax primer. Do not use in wet areas.
(1 and 5 litre containers)

LTP Ironwax Satin (Interior Use Only)



A hard wearing ionised acrylic satin finish sealer, that provides an easy to apply self shine satin finish on porous quarry tiles, terracotta, brick, slate, stone, terrazzo, unpolished marble and cement floors. LTP Ironwax Satin may be used as a wax protector to strengthen the seal offered by non-silcone waxes. Maintain with LTP Floorshine.
(1 and 5 litre containers)

LTP Mattstone



Suitable for all wall and floor surfaces LTP Mattstone provides a natural matt finish with minimal change to surface character on travertine, quarry tiles, terracotta, slate, stone, unpolished marble, terrazzo and cement floors. Provides effective resistance to staining from coffee, wine and other domestic fluids. Maintain with LTP Waxwash on floors and LTP Stonewash on walls. Can be used in wet areas. Suitable for interior and exterior use and on floors that have no damp course.
(500ml, 1 and 5 litre containers)

LTP Colour Intensifier And Stainblock




Suitable wall and floor tiles enhancing the natural colour, characteristics and appearance of travertine, quarry tiles, brick, slate, flagstones, limestone, granite worktops and tiles, terrazzo etc, with a matt finish. Provides a protective resistance to staining from coffee, wine and other domestic fluids. Proforms well in wet areas, including bathrooms and swimming pool surrounds. Maintain with LTP Waxwash on floors and LTP Stonewash on walls. Suitable for interior and exterior use and floors that have no damp proof course.
(500ml, 1 and 5 litre containers)

LTP MPG Sealer



A colourless impregnating sealer especially formulated for use on tiles that have been mechanically polished to create a highly polished finish. Ideal for use on polished porcelain, polished marble, polished granit, polished limestone and polished slate. Suitable for both wall and floor surfaces. Strongly protects against water, oil, dirt and grease. Ideal for use on granite worktops. Maintain surfaces with LTP Waxwash for floors and LTP Stonewash for walls and worktops. Suitable for interior and exterior use.
(1 and 5 litre containers)

LTP Wall and Floor Grout Protector



A colourless barrier that helps absorbent, porous grout joints from penetration by water, dirt, oil, grease, sebum and limestone. Suitable for use in kitchens and bathroom. Ideal for use on newly laid glazed ceramic walls and floor tiles where in normal conditions unprotected grout joint quickly become dirty.
(1 litre containers)

LTP Grout & Tile Protector



Easy to apply. Forms a colorless barrier that helps to protect porous wall and floor grout joints from penetration by water, dirt, oil, grease and limestone. Assists cleaning. Ideal for use in wet rooms and shower enclosures. Used as a 'top up coat' this product further protects natural stone and all other types of masonry surfaces. Over spray on most surfaces will completely dissipate leaving no hard to remove residue.
(600ml aerosol)

LTP Glaze Protector (Interior Use Only)




A low maintenance satin finish self shine sealer for glazed ceramic, unpolished porcelain and vitrified quarry tiles. Protects and embellishes all types of tiles, exellent for use on low absorbent quarry tiles including new victorian style flooring. Highly resistant to wear and stains. For interior use only. Facilitates maintenance and cleaning. Maintain with LTP Floorshine.
(1 and 5 litre containers)


Identify your tile type for sealing...

[Dave]

That is posted somewhere... Stone forum i think..

[Rich]

That is posted somewhere... Stone forum i think..

Do you mean that the post I deleted, wasnt deleted and I have just re-typed the entire thing out again but with little pics?

[Rich]

Where have all the little pics gone!!?

I think im going to cry.

[user123]

Don't cry.. awwh..I just looked in my subscribed threads...you did this brilliant one Identify your tile type for sealing...
let's see if I can find another copy of the one above? Your posts are great!

Ah, maybe Dave meant his thread here: Stone and Tile sealing products from LTP.

meaning that we have it already? This isn't going to make you feel any better, is it... :-/ sorry...

[Rich]

No thats fine, I can live with that

I just didnt like the idea of doing the same thing twice thing twice

If its the same as one of Daves it cant be bad