Kitchen splashback

[postie]

Hi guys

Now i know you centre a hob or cookerhood on splashbacks but what if the cooker hood is on a wall where the worktop finishes halfway along the wall, do you start with a full tile level with the end of the worktop , or do you still centre the hob but in doing so end up with a small cut at the end of the worktop.I would start with a full tile at the end of the worktop (black line) like in the photo is this right way ?.

[Fred]

I would still centre between the two cupboards, the extractor is wrongly placed. I would even go as far as explaining the situation to the punter and have it properly placed.

[postie]

The extractor is centred with those units its the shadows that make it look wrong here is another angle

[wayne]

are they battens on the walls?

[Dave]

Yes postie mate..centre the extractor..start with a full or half tile , see which gives you the biggest cut at the w/top end.........dave..

[postie]

Yes Wayne doing a job for a property developer but the chippys have not fixed the worktop on yet and still have to cut the hob in ,plus the last kitchen i did the worktops were way out so had to batten them too . And just to top it off the plasterers are crap too when wrapping the tiles around the window i will have to combat the angle sitting out a few mill from the wall

[Fekin]

Heh, funny how one pic looks like the hoods well of center when it really isn't

[postie]

It will give me a small cut like this

[Fekin]

I'd be looking at having the small cut on the other side, after marking out how it would look around the hood first.

[Shuntstick]

I'd like to see the finished pic.

[postie]

There we go

[GazTech]

[quote=postie;35536][IMG]http://i8.photobucket.com/albums/a15/malawihap/DSC00036.jpg[/IMG]
[IMG]http://i8.photobucket.com/albums/a15/malawihap/DSC00042.jpg[/IMG]

[IMG]http://i8.photobucket.com/albums/a15/malawihap/DSC00038.jpg[/IMG]

There we go[/quote]great stuff postie...what was there to worry about lol....customer will be delighted.....Gaz