Have i missed anything of my checklist?

[actionjackson]

Following on from my previous threads and endless reading of other posts i have finally decided how i will proceed with tiling my 8m2 bathroom floor. The chipboard floor will be overboarded with 18mm ply, Marmox 10mm tile backer board and fitted with 3mm UFH mat before laying 400x900mm porcelain tiles.

This is my checklist and would like to know if i have missed anything and what quantities/products are recommended.

I will also need to purchase all tiling specific tools so guidance in this area would be welcomed.

1. 9m of Porcelain tiles
2. Flexible Adhesive
3. SLC
4. UFH (Warmup 2mm 150W electric mat)
5.10mm Marmox Board
6. Flexible Adhesive to lay Marmox
7. Screws/Washers for Marmox
8. 18mm Plywood
9. Screws for Plywood

[charlie1]

Grout?

[Sir Ramic]

SLC suitable for UFH !

[charlie1]

Maybe stating the obvious here, Primer!!

[actionjackson]

Following on from my previous threads and endless reading of other posts i have finally decided how i will proceed with tiling my 8m2 bathroom floor. The chipboard floor will be overboarded with 18mm ply, Marmox 10mm tile backer board and fitted with 3mm UFH mat before laying 400x900mm porcelain tiles.

This is my checklist and would like to know if i have missed anything and what quantities/products are recommended.

I will also need to purchase all tiling specific tools so guidance in this area would be welcomed.

1. 9m of Porcelain tiles
2. Flexible Adhesive
3. SLC
4. UFH (Warmup 2mm 150W electric mat)
5.10mm Marmox Board
6. Flexible Adhesive to lay Marmox
7. Screws/Washers for Marmox
8. 18mm Plywood
9. Screws for Plywood

List updated

1. 9m of Porcelain tiles
2. Flexible Adhesive
3. SLC for UFH
4. UFH (Warmup 2mm 150W electric mat)
5.10mm Marmox Board
6. Flexible Adhesive to lay Marmox
7. Screws/Washers for Marmox
8. 18mm Plywood
9. Screws for Plywood
10.Grout
11. Primer

[Sir Ramic]

SLC suitable for UFH !

[charlie1]

ball stopgap 700 would do i think, or 300

[Bathfix Bob]

.......and a grapling hook to get over the step under the door.

Nah your okay! Its just a pet hate of mine but can't be avoided.

[actionjackson]

ball stopgap 700 would do i think, or 300

What would this be used for?

[faithhealer]

Programmable Digital Thermostat for the ufh and Silicon for the edges

[Sir Ramic]

What would this be used for?

Its a SLC, but you could also use Mapei Fibreplan.

[whitebeam]

A few tinnies for the end of the day

[actionjackson]

It looks like my checklist is complete! LOL. Can someone please advise on the quantities in RED -

1. 9m of Porcelain tiles
2. Flexible Adhesive
3. SLC
4. UFH KIT (Warmup 2mm 150W electric mat)
5.10mm Marmox Board
6. Flexible Adhesive to lay Marmox
7. Screws/Washers for Marmox
8. 18mm Plywood
9. Screws for Plywood
10. Grout
11. Primer
12. Silicon
12. 12 pack Stella

Is Granfix FASTSET flexible adhesive OK as i can get this for a good price.

Also, can i just screw the Marmox board?

[actionjackson]

It looks like my checklist is complete! LOL. Can someone please advise on the quantities in RED -

1. 9m of Porcelain tiles
2. Flexible Adhesive
3. SLC
4. UFH KIT (Warmup 2mm 150W electric mat)
5.10mm Marmox Board
6. Flexible Adhesive to lay Marmox
7. Screws/Washers for Marmox
8. 18mm Plywood
9. Screws for Plywood
10. Grout
11. Primer
12. Silicon
12. 12 pack Stella

Is Granfix FASTSET flexible adhesive OK as i can get this for a good price.

Also, can i just screw the Marmox board?

Someone must be able to help me with my quantities.

[Dave]

It looks like my checklist is complete! LOL. Can someone please advise on the quantities in RED -

1. 9m of Porcelain tiles
2. Flexible Adhesive 2 x 20kg
3. SLC 2 x 25kg
4. UFH KIT (Warmup 2mm 150W electric mat)
5.10mm Marmox Board
6. Flexible Adhesive to lay Marmox 1 x 20kg
7. Screws/Washers for Marmox you can buy this direct from them or CTD do them.
8. 18mm Plywood
9. Screws for Plywood
10. Grout Mapei ultra colour plus is what i use.
11. Primer SBR
12. Silicon
12. 12 pack Stella

Is Granfix FASTSET flexible adhesive OK as i can get this for a good price.

Also, can i just screw the Marmox board?

Hope that helps.