window ledge

**peterhouse** · 05-09-2010

Just a quick question i have a window ledge to tile it takes two 10cm tiles on the flat ledge but i have a quarter inch gap left over whichever way i put tiles,hopes this makes sense thanks for any suggestions

**faithhealer** · 05-09-2010

do you mean at the back between the tile and window frame, in which case if it was a white plastic frame I would buy a bit of trim, only a couple of quid

**peterhouse** · 05-09-2010

yes as you look out of the window the two tiles facing uppermost on the ledgeis where the gap is i do have a white frame window as well

**Dave** · 05-09-2010

What size cut do you have left and right of the cill and what size cut at the face of the cill..?.. you could always start with a half tile and give the wrapped effect if side cuts match..if you get my drift.

**faithhealer** · 05-09-2010

Originally Posted by Dave

What size cut do you have left and right of the cill and what size cut at the face of the cill..?.. you could always start with a half tile and give the wrapped effect if side cuts match..if you get my drift.

logged that one dave, never done it that way on a sill......yet