floor tiling

[dazrobson]

i have a cafe floor to do down stairs which leads into two toilet cubilcles it has a step and he wants the lot tiles do i use a edging for the step down from the tolilet to the original floor

---------------------------------toilet then step down by about 6 inches what is the best thing to do do

[Dave]

Schluter do some good edging profiles for steps........dave..

Stair-nosing Profiles - Schluter-Systems

[dazrobson]

ok thanks
----
will i get this from tops tiles in newcastle the step is only 6inches form the level surface
----
there is only 1 small step will i have to use this as you have explained
soz for being a pain

[Dave]

you can use any step trims that topps sell but i put schluter up coz they do some really nice ones..if you pm gaz@topps he will let you know what they sell........dave..

[sc24]

the step nosing should also be a colour contrast to comply with DDA regs

[Dave]

chrome always works with any colour.........dave..

[guy1976]

if you want to buy the schulter trim ctd are at byker ,top of sheilds road

[GazTech]

[quote=dazrobson;30335]i have a cafe floor to do down stairs which leads into two toilet cubilcles it has a step and he wants the lot tiles do i use a edging for the step down from the tolilet to the original floor

---------------------------------toilet then step down by about 6 inches what is the best thing to do do[/quote]Finish step edge with original stile step tread...black or red..and some 6 inch of the same colour....otherwise a junior floor edge trim,in brushed steel sat on top of tile cuts to face of step......Topps can get all of those for you...Gaz

[dazrobson]

i have went with the chrome edging as recomended by dave from topps tiles

[Dave]

post some pics daz in the gallery when you have finished.............dave..

[dazrobson]

will do dh