hand made soap dish

[kilty55]

anyone ver made one?

this is based of hillheads marble shelves he installs,im planning on doing a shelf or two out of trav and wanted to create a smooth dip for soap dish,,how would i go about it guys/gals?

[diamondtiling]

Got me there Jamie lad, surely you would need to get a piece like you describe made for you by a bespoke company? The tool cost alone would be prohibitive.

[kilty55]

dont have an issue cutting the shelf..its for an internal so semi rounded peices just wanted to create a dip in centre nothing too heavy just subtle dom

[Colour Republic]

Have you got a rotary sander?

[user123]

I have a new toy, a soft start angle grinder, but not much experience with it yet, wouldn't that do it, used subtly with the right disc?

[united]

Why don't you cut a few lines into it about 3mm deep and that would stop the soap slipping off. If you know what I mean.

[squeaky]

lidl have a sds drill going cheap

[peckers]

if you know a bold gentleman then kep rubbing it on his head

you could remove most off it using a cup grinding wheel in your angle grinder but taking it steady and then use a rotary sanding wheel in a drill to smooth the marks out and then use wet and dry paper to polish it up with. I would drill a hole in the centre to so as to let the water out nobody likes soggy soap

[jay]

I have a new toy, a soft start angle grinder, but not much experience with it yet, wouldn't that do it, used subtly with the right disc?

cant see why not baybe a drain hole in centre

top idea mosaic girl

[squeaky]

if you have an angle grinder you can get sanding pads, if thats any help

[Colour Republic]

I would drill a hole in the centre to so as to let the water out nobody likes soggy soap

Not ture peckers, Does nobody else like squishing it in their hands?

Did I really just say that in an open forum

[user123]

Thanks, Jay

[doug boardley]

just get a B&Q tile, they come "dish" shaped as standard!

[kilty55]

its a cracker

[simon1]

just get a B&Q tile, they come "dish" shaped as standard!

[kilty55]

rotary sanders sounding good,can anyone recomend a mid range one?