LinkBack URL
About LinkBacksif so, please tell us what materials that you would propose to use, given a free rain!! starting with what you would build the walls, ceiling, floor from,
no catch here!! just an interesting exercise
Welcome to Tilers Forums Tiling Forum
The UK's Biggest Tiling Forum for DIY and Professional Tilers; find
DIY and Professional Wall and Floor Tilers are Welcome
Advice from by Tilers, Manufacturers, Distributors and Tile Suppliers
p.s.: Registered members will not see this ad
have you ever been asked to tile a steam room
if so, please tell us what materials that you would propose to use, given a free rain!! starting with what you would build the walls, ceiling, floor from,
no catch here!! just an interesting exercise
Re: have you ever been asked to tile a steam room
never come up for me, but i'll watching for replies to this one!
I saw a really really sad looking guy in a tow truck this morning..I thought 'He's heading for a breakdown'
Re: have you ever been asked to tile a steam room
I have one to price for a friends mum but as yet have never fitted one. THe husband is also the local building inspectorIm thinking that she is going for one of these chinese plastic bases with the tray and doors as one unit so it would be just the rear corner to build and tile.
I have to contruct one wall anyway as far as i know so i would go with the following
CLS for the stud work with a plastic membrane over the insulation at 400 centres with plenty of noggins covered with either hardi backer, or aqua panel. Probably Hardi backer as this job is on the top floor of a town house and Aqua panel is too damn heavy to carry up 2 flights! Tape the joins and adhesive will depend on tiles but definately a cement based adhesive due to the steam.
Im sure others will differ but thats how I would do it and i offer 2 years guarantee on all my bathroom installations.
However if there is a better alternative I would consider it
Last edited by Scott; 20-02-2010 at 05:26 PM.
Re: have you ever been asked to tile a steam room
Epoxy grout for deffo, a cement backer board, possibly even aluminium framing rather than timber. vapour barriers etc
Re: have you ever been asked to tile a steam room
butech one flex adhesive butech anthracite epoxy grout walls constructed from wadi board taped and skimmed with the one flex
Last edited by deanotile; 23-02-2010 at 07:16 PM.
diamondtiling (25-02-2010), garythetiler (24-02-2010), Gazebo (26-02-2010), jamie B (23-02-2010), Scott (23-02-2010), trevortine (01-03-2010), whitebeam (23-02-2010)
Re: have you ever been asked to tile a steam room
I have built a number of steam rooms over the years and always tile the floor first then build the room on top of the floor, aluminium framing with aqua panels screwed on using s/steel washers and screws all joints are then taped and filled, ceilings are built the same way and are better pitched than vertical . Tile using flexi adhesive and grout using epoxy [ have seen them grouted with flexi floor grout with no problems ]. Finaly silicone all the corners / angles and edges along the walls, floors and ceiling. We have used this method with out any problems for a number of years for major national clients . hope this helps
jamie B (23-02-2010)
Re: have you ever been asked to tile a steam room
i put youtube video about WEDI here: Bath shorter than room width . You can do all things with this material.
Re: have you ever been asked to tile a steam room
nice one mate i like the remembrance link, and we do honour the pole's for there bravery and valour in the war ,when i was a young lad i worked with some of these old men, they were great guy's god bless them!!Originally Posted by Polishtradesman
Polishtradesman (23-02-2010)
Re: have you ever been asked to tile a steam room
Did you see video about wedi board??nice one mate i like the remembrance link, and we do honour the pole's for there bravery and valour in the war ,when i was a young lad i worked with some of these old men, they were great guy's god bless them!!
Re: have you ever been asked to tile a steam room
yes thanks mate!! i use wedi, marmox, Aquatherm,there are some good boards out there!!
Re: have you ever been asked to tile a steam room
something I've never done is a steam room, would like to try one someday though
Re: have you ever been asked to tile a steam room
you can always build your own mate
Re: have you ever been asked to tile a steam room
Do you think wedi would be good for steam room ??yes thanks mate!! i use wedi, marmox, Aquatherm,there are some good boards out there!!
Re: have you ever been asked to tile a steam room
they build steam room from them, and wedi sell complete steam-room kit over there
Re: have you ever been asked to tile a steam room
I know that schluter did kerdi type membrane for steam rooms
"Experience is simply the name we give our mistakes"
Re: have you ever been asked to tile a steam room
Re: have you ever been asked to tile a steam room
I think he's got some fluid on the brain
"Experience is simply the name we give our mistakes"
Re: have you ever been asked to tile a steam room
Ha Ha much faster way to do steam room then wedi kit
Re: have you ever been asked to tile a steam room
Just asked to tile steamroom today. 2 side walls are plasterboard and seat is plywood. Rest is scratchcoat plastered wall. What can I do with plasterboard and ply? Can I tank them beforehand? Havent committed myself to it but any advice welcome.
Re: have you ever been asked to tile a steam room
quality work there Dean
butech one flex adhesive butech anthracite epoxy grout walls constructed from wadi board taped and skimmed with the one flex
Re: have you ever been asked to tile a steam room
Dave, we use NobleSeal TS or CIS for steam rooms. These sheet membranes have a perm rating way, way below 1.0 ...I think it is on the order of ~0.05. For walls I think we have always gone over mud and used CBU's for the ceilings.
Epoxy grout on the walls and silicone in the corners.
The specs for Wedi here in the US say that for Wedi to work in a steam shower epoxy must be used to set the tile. Before I knew about this requirement I built several steamers Wedi so I have always wondered when this might be a problem.
Re: have you ever been asked to tile a steam room
I use Marmox from dale sauna in Harrogate, I can send them the spec and they deliver it to site flat packed. We bolt it together and use Knauf adhesive to seal the walls, the lighting in the ceiling is a kaleidoscope fibre optic type, we fit the motor onto the ceiling and drill 200 plus 10mm holes to fit the lights. I get the pre formed seating the same as Deano and then mosaic these. The walls have heating cables fitted behind the tiles.
The ceilings are usually mosaics if they are arched. These rooms are built over an existing 100x100 stainless steel grid in the floor which we would have fitted prior to the aromatheraphy room itself being built.
Monsoon showers are similar in construction, we make them up from pre formed curved marmox boards.
I will have to try and find some pictures and scan them.
Re: have you ever been asked to tile a steam room
DOM i would love to see some pic's of these mate, i have never seen heating cables in the walls??
Re: have you ever been asked to tile a steam room
DOM i would love to see some pic's of these mate, i have never seen heating cables in the walls??
It works exactly the same as UFH Dave but you will know that already. We tried mats at first but they are fiddly and time consuming so it was cable from then on. The probe and cable enter from the back of the room and then through conduit to a cupboard, alternatively the control goes on the roof where it is set up as a timer to go off and come on during the clubs opening hours. Really easy to fit, just like doing a floor.
Re: have you ever been asked to tile a steam room
some great info there dom
diamondtiling (25-02-2010)
Re: have you ever been asked to tile a steam room
Hi All, this thread seems to be closest to what I want to achieve. I am building a steam/shower room as part of my en suite refurb and have been looking at vapour barrier solutions. The most comprehensive seems to be Kerdi-DS from Schluter and it looks like Wedi are players also, although I canot seem to find the equiveleant of kerdi DS from Wedi. Do you just use Wedi boards (sealed at joints) and no vapour barrier as such. Any advice would be useful. Deanotile's work looks amazing although I would rather not have full mosaic
Steers in the right direction would be greatly apprciated!
Posting Permissions
Reply With Quote
Bookmarks