Hi Guys,
I'm laying wall and floor porcelanosa tiles next week, any tips - gotta get it perfect.
Cheers
Welcome to Tilers Forums Tiling Forum
The UK's Biggest Tiling Forum for DIY and Professional Tilers; find
DIY and Professional Wall and Floor Tilers are Welcome
Advice from by Tilers, Manufacturers, Distributors and Tile Suppliers
p.s.: Registered members will not see this ad
Hi Guys,
I'm laying wall and floor porcelanosa tiles next week, any tips - gotta get it perfect.
Cheers


take your time![]()
MJ17 (25-09-2009)
Porcelanosa are a brand so what tiles are they ?
MJ17 (25-09-2009)

there tiles are top notch,should make it an easier job![]()
alcohol-the cause and solution to all of lifes problems
http://absolute-tiling.webs.com/
tiler in east kilbride/tiler in glasgow/tiler in hamilton
Tiler in east kilbride-AbsoluteTiling
MJ17 (25-09-2009)

Hi mate, just make sure you use correct materials(porcelbond bagged addisive). Do the right prep work. Work clean. As said take your time. If they are polished make sure you seal before grouting. Hope this helps. Good luck
All Star Tiling. H. 01942 813542
M. 07956508663
All aspects of Tiling In Wigan , Bolton, Leigh , Manchester
MJ17 (25-09-2009)
Not sure until I get there which tiles they are. Any tips on cutting - dry/wet? (if it goes well it probably lead to more work, i think that's why I'm fretting a little as work is few and far between here).
Cheers



How can you start a job without knowing what tiles they are?
find us : www.tilernewcastle.co.uk visit us : www.timelesstilingsolutions.com
' CREATING TIMELESS WALLS & FLOORS - CREATING TIMELESS WALLS & FLOORS '
MJ17 (25-09-2009)



Have you been tiling long
"Experience is simply the name we give our mistakes"
MJ17 (25-09-2009)
it's a new showroom, guy wants me to tile a bay for him. He told me it'l be in porcelanosa. Have been tiling 6 years. Thanks



Just be your luck to turn up with a TS60 to find the tiles are 1200mm long.
Check the size before you go so you have the right tools.
New logo 't' shirt - dust sheets - and professional attitude.![]()
find us : www.tilernewcastle.co.uk visit us : www.timelesstilingsolutions.com
' CREATING TIMELESS WALLS & FLOORS - CREATING TIMELESS WALLS & FLOORS '
good one

at least you have a good tile brand to work with not b&q crap 6 years tiling you should have no probs at all take your time and you will wonder what all the fuss is all about good luck!![]()
MJ17 (27-09-2009)


Porcelain tiles.....
As I always say!
Dont forget your diamond holesaws and drills for things like radiator pipes as well as fixtures and fittings !
Richard Hazell - Diamond Tile Drills
Decent reliable gear that wont let you down
01992-410636 0777 366 4519
richard@365drills.com
http://www.365drills.com
Tile Drills
MJ17 (27-09-2009)
youve been tiling 6 years and your worried about tiling a bay in a shop. Surely this is a wind up???
just finished tiling porcelanosa showroom in solihull they only rec 1mm joints on all their stuff and alot of their tiles are over 600mm so be prepared
![]()
Last edited by smurf21; 26-09-2009 at 12:22 PM.
"WE DON'T PICK EM WE ONLY STICK EM"
MJ17 (27-09-2009)
Hi CJones,
This is suppose to be a forum for tilers to get advice from colleagues. I am tiling a bay, yes, but I have never used the Porcelanosa range before - even though I have been a tiler for 6 years and I was asking for any tips from fellow tilers! Today, after visiting a porcelanosa showroom, I am not at all concerned. Thank you to all who have supplied supportive comments.![]()
Thanks Smurf,
I've been to a showroom and now i've seen what's expected of me I feel much more confident. Thanks for showing your photo's, I appreciate it.![]()
Thanks Richard,
They're on my list mate!
Cheers
thanks for the advice Garretridge, quietly confident!![]()
Bookmarks