SLC onto plywood

[stan1888]

Hi is the above possible in the following situation:

Want to remove old tiles that were put down on 15mm plywood which i believe were screwed down every 6 to 8 inches onto floorboards. Don't think the customer wants the ply lifted incase it wrecks the floor underneath. So would it be possible to just lift the tiles, put down a slc and re-tile? If so what slc to use, BAL Multibase/ Acrybase?

I've used slc's on concrete floors but to be honest was not sure if they can be used on ply when tiling (thought this was for soft floor coverings only).

Thanks..

[Dave]

Mapei fibre plan...made for levelling timber floors....

I don't think bal do one for timber do they...not sure..?

[doug boardley]

taking up the tiles will probably lead to quite a bit of delamination on our ply, (where do you get 15mm ply from?),In theory tho' it's fine, as long as your ply remains sound. I'd use a two part slc tho

[peckers]

2 part slc by ardex cant remember the name but they do one for wooden floors

[Fred]

Ardex Arditex, 2 part, but IMO hard to use if not used to SLC's.

[peckers]

Ardex Arditex, 2 part, but IMO hard to use if not used to SLC's.

that was the one..memorys not what it used to be

[NETT Darren]

Just had the weber rep in with a new flexi leveller, got fibres in it for reinforcement, suppose to be the dogs danglers of levellers, easy to apply and good self levelling properties

[david campbell]

taking up the tiles will probably lead to quite a bit of delamination on our ply, (where do you get 15mm ply from?),In theory tho' it's fine, as long as your ply remains sound. I'd use a two part slc tho

my local b&q stocks it but the other nearby ones don't(strange)

[stan1888]

Cheers for the feedback folks...