apearance of a full tile

[cripo]

hi all just doing a friends bathroom and need some help i have set my widths so each tile looks like a full tile in all corners but its a small cut going out the corner is this corect??

[brian c]

as long as its not a slither then you should be fine.Check out the setting out threads to help you.

Room setting out...

have a read.

[beanz]

You might need to take into account if the wall runs out too. I generally aim for around half a tile, give or take.

[doug boardley]

if your cut into the corners are less than half a tile try finding the centre of a tile and straddling the centre line of your wall with it, or if you've done it that way already, butt an edge up to the centre wall line and work it back to the corners

[faithhealer]

the 'half a tile wrap a round' looks better in my opinion than a full tile anyway, and safer!

[gaz man]

if ur a diyer centre wall and and check what size of cut your getting an d work out for big cuts ie over half tile size

[gaz man]

sorry should have added do this on every wall

[cripo]

the 'half a tile wrap a round' looks better in my opinion than a full tile anyway, and safer!

its turned out nice the cut is a fith of the tile so looks like a full tile in corners if i had set out any different i would have sliver at windows one window is higher than the other will post pics when finished see what you all think thanks for the advice tho lads much apreciated !!!!!