newbie question

**asabrush** · 19-11-2008

Hi all,

I'm trying to source a large bridge saw(urgently!) Client needs a me to mitre 90cm 12mm porcelain for a set of steps.I need to be able to cut these without having to plunge cut,ie. a huge table!

Any ides would be extremely appreciated,my budget is around £1000

Thanks

**Dave** · 19-11-2008

How about one of these from tradetiler.........ideal for mitres...

Makita Power Saw (110v only)

Wet cutting hand held power saw from Makita (can be used dry with suitable blade)

Water fed to both sides of blade

As every day goes by, tiles seem to be getting even bigger this can be a big problem when it comes to wet cutting. The traditional machines become so heavy and expensive they are not viable. With the use of a straight edge clamped on the tile/slab accurate cuts can easily be achieved.
Accurate free hand cuts can also easily be achived
Highly suited to grout raking by reducing the depth of cut

Electrical earth leakage breaker
Blade Diameter: 125mm - Bore: 20 mm
(we include ring to make standard 22.2mm blades fit)
Depth of Cut @ 90°: 40mm
Depth of Cut @ 45°: 26mm
No Load Speed: 12,000rpm
Input wattage: 860w
Net Weight: 2.9kg
110v only (because of water)
5 M water feed tube, rubber tap fitting

Included - Continuous rim blade rated for concrete - suitable some stone, travertine and marble. However we recommend a suitable tile blade is purchased separately
Blade Here

Price: £255.30 £299.98 Including VAT at 17.5%