Removing tiles off floorboards.

[tjsmiler]

Am doing a job on a kitchen floor. I have to take the tiles up (ceramics) and i am pretty they are on floorboards.

Basically the house was extended and the customer is sure there were floorboards down when the last tiler was there so i am expecting half the floor to be floorboards and the other half concrete where the extension was done.

Ant tips on best way to remove off floorboards or is it just as normal?

[NETT Darren]

Drill with a rotary stop on it or kangoo, tilers sds chisel on it and whip them up

[Dan]

Just get them off the best way you can mate, try and not damage the boards too much but as Darren say, using a good SDS Chisel bit on them is probably the quickest way.

[tony TLC]

i use sds(b&q £30) rotarystop shifts most things and go with the grian on the floor boards less damage good drill for mixing too

[tjsmiler]

Thanks fellers.much appreciated

Any tips on the best SDS to get, there seems tobe so many to choose from??

TJ

[Varley]

Some suggestions in this thread m8

Advice on drills

[tjsmiler]

Thanks Varley