AdesilexP10

[brian c]

I have a glass mosaic job coming up and was wondering if any of you have tried this product?Mapei make it so want to know feedback on it or else it will be BAL Mosaic fix(not that thats a bad thing)

[Dave]

White high performance cementitious adhesive with no vertical slip and extended open time for glass, ceramic and marble mosaic finishes.

Applications:
Interior and exterior floor, wall and swimming pool (mixed with Isolastic diluted 1:1 with water) bonding of glass, ceramic and marble mosaics on paper
or netting on conventional walls with cementitious renders, cementitious screeds, anhydrite screeds and gypsum walls (specifically primed beforehand), interior walls in foamed concrete blocks, gypsum board, underfloor heating systems, suitably cured concrete structures, painted interior walls, as long as the paint is well anchored.
When mixing Adesilex P10 with Isolastic as a 50% substitute for water, the performance characteristics and deformability improve, satisfying class S2 (highly deformable adhesive) according to EN 12002. Mixed this way, Adesilex P10 can be used for installations in swimming pools, on flexible and non porous substrates such as Mapelastic, Mapegum WPS, etc. and on existing ceramic coverings. Technical data:
Pot life: over 8 hours.
Open time: 30 minutes.
Grouting: walls: 4-8 hours,
floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
Ready for use: approx. 14 days.
Colour: white.
Application: notched trowel n. 4 or 5 or 6.

[brian c]

Have you used it Dave?I noticed that you cant grout until after 4-8hrs,back next day then on that one.

[Dave]

Not as yet bri.....but i am giving the mapei range a thought...have tried some products though...

[chrisroe]

i have used it and it is very good stuff but there again i think mosaic fix is the best of the best so either i would be happy with