Help!: Bathroom Install part deux?

[Butters]

Thanks for all the repsonse yesterday guys, here's another question.

I know this isnt directly a plastering question BUT, what do I use to put up the new plasterboard with and what thickness should I get?

I have two breeze block walls and the rest are studs.

I know PB tacks will be fine for the stud walls but I want to get the right stuff for the brick walls.

I only have a B&Q warehouse near me.

Ta muchos.

[Turkish]

Drywall adhesive mate. Mix it up and put "blobs" on it every 30cm or so so they come out about 25mm so then when you push it to the wall they squash down to about 12mm. If you have a socket hole in it then put a solid run of adhesive around it and the same along the bottom of the board. There is a thread on here somewhere that has a great decsription and pictures on how to do it, i think Dave put it on. Oh and 12.5mm board

Turkish

[Butters]

Cheers,

Do I need to PVA the walls first?

[Turkish]

Personally wouldn`t bother for just dot and dabbing mate.

Turkish

[Dave]

Just wet the block walls slightly first and that will suffice with drywall adhesive....