Tiler Training School Open Day - TilersForums.co.uk | Tile Forums

**tilertraining** · 22-06-2008

Hello Everyone

The open day was hoofing and i would like to thank PCI, CTD and Ecofloor for coming along and providing the demos.

We kicked off proceedings with the under tile heating demo provided by Ian Greenhaugh. Ian has been working alongside the school now since we opened and he is always on hand to give advice and he will also go out on your first under tile heating job once you have left the course as he has done countless times now. And we all know how scary it can be laying down your first mat.

A quick cup of tea and a bit of networking and we got right into the PCI Pecilastic demo. All in all a very good product that will save you time and money in the long run and will also eliminate ugly steps that are unavoidable when using ply. I will be having a go myself in a couple of weeks so I'll keep you posted.

We then cracked on with the HSP 34 leveling compound which is fibre based and is incredibly strong. It is always good for previous course attendees to see this going down with the use of spike rollers and trowels and to note the importance of mixing correctly.

And finally we finished off with the Nanolight demonstration. Anyone who has used this product will agree that it is in a class of its own. This is the second demo that we have had on the Nanolight and we tend to convert people over to this product once they have had a go.

We also had the TI 66 S out for everyone to try and we had the Montolit porcelain (angle grinder) hole cutters which are always good fun to try and people are always surprised how much more control you have with the angle grinder compared to a drill.

Mick from CTD Temple means (Edinburgh) was also at the school getting guys set up with accounts and letting them know about some of the deals going on at the store.

All in all a good day with a lot of relevant questions about the products asked and answered and a great opportunity to do a bit of networking.

Cheers to everyone who came down and we hope to see you at the next open day. As for anyone that missed it make sure you keep logged onto the forum and we will let you know when the next one is.

Antony O'Neil

**Dave** · 22-06-2008

Pleased it went well antony......no pics then..?....

.........

**tilertraining** · 22-06-2008

No mate. Thats a good idea though. Will get phots for the next one.
What day you going to the Tile and Stone show?

**wetdec** · 22-06-2008

Good it went well bad I didnt know, could of brought along a dec and showed you the ropes......Next time hopefully

tiler

..

**tilertraining** · 22-06-2008

Would be good to see the kit. Is it the same as Wedi's?

**Dave** · 22-06-2008

Quote:

Originally Posted by tilertraining

No mate. Thats a good idea though. Will get phots for the next one.
What day you going to the Tile and Stone show?

I won't be attending the show Antony.....i want to but have holiday commitments shortly afterwards.......wish i was going but not to be this year......will plan it better next year though......

**grumpygrouter** · 22-06-2008

Why does Pecilastic do away with ply then? I thought it was a decoupling membrane!

**wetdec** · 22-06-2008

Quote:

Originally Posted by tilertraining

Would be good to see the kit. Is it the same as Wedi's?

Behave will you they sell insulation board adapted for wetrooms we sell wetroom formers which are made specifically for the job......

tiler

..

**wetdec** · 22-06-2008

Quote:

Originally Posted by grumpygrouter

Why does Pecilastic do away with ply then? I thought it was a decoupling membrane!

Its another Durabase WP / Kerdi mat grumps but the reps think otherwise it would seem....

tiler

..

**grumpygrouter** · 22-06-2008

Thats what I thought Tony, never seen the product so I can't comment but I was informed on the forum some months a go about it when I was discussing Ditra once.

Can't see how pecilastic at 0.8mm thick is going to stop a joist flexing

**tilertraining** · 23-06-2008

Morning Gents

Yes PCI did try to convince us that laying the mat down with 3 mm notched trowel using a flexible cement based adhesive would strengthen a floor however they were not too convincing with the argument. However on good secure floorboards suficiently screwed down would be an ideal area to lay the mat. Imagine not having to lump around boards.

Anyone who has had a go i would be interested to hear what they think.

**mickbull** · 23-06-2008

Just wanted to say cheers to antony and his guys for letting me come down to the school. After speaking with the guys he had trained I was very impressed with the after service they give, knowing they can ring ant at any time for help really seemed to make a difference, and give them the confidence they need to become competent tilers!

The training itself was excellent, and everyone seemed to really enjoy the day. For anyone thinking of doing a tiling course in Scotland I would definetly recommend you go see ant, you won't be dissapointed.