whats the best floor adhesie for direct application to 18mm T&G chipboard?? - TilersForums.co.uk | Tile Forums

diamondtiles · 23-05-2008

Whats the best floor adhesive to use when laying ceramic tiles to a floor that has 18mm T&G chipboard - a glass of water when placed onto the floor does not ripple when walking but does ripple when dumping slightly

**CTD Marie** · 23-05-2008

Hi ya.

Just spoke tro one of the guys at the Newbury branch and they have informed me that Bal fast flex adhesive and Bal super flex grout.

Hope this helps.

Turkish · 23-05-2008

Yep fastflex would have been my option!

Turkish

**wetdec** · 23-05-2008

Any 2 part I would say

tiler

..

diamondtiles · 23-05-2008

would i need to overboard with ply and if so, whats the minimum ply thickness i can get away with???

**wetdec** · 23-05-2008

Top right hand corner of forum below and to the left of your name there is a search button m8 have a go this has been talked about quite a bit in the last couple of days.

Put weyroc in the box and push SEARCH

If you cant find what your looking for then by all means shout

tiler

..

**grumpygrouter** · 23-05-2008

Ardex-flex 7001 and floor primed with P51 primer.

diamondtiles · 23-05-2008

where is this place where i can type in
----
where can i type this in

**dock** · 23-05-2008

You could use S2 Ultraflex or Keraquick with Latex Plus

If overboarded with 18mm ext. grade ply screwed at max 300mm centres use Keraquick without admix. The adhesive is classified S1 so has a measureable degree of flexibility/deformability.

Either way grout with Ultracolor Plus grout has 26 colours and is classified CG2.

dock

**grumpygrouter** · 23-05-2008

Quote:

Originally Posted by diamondtiles

where is this place where i can type in
----
where can i type this in

At the top of the thread window you will see a small rectangular button with "search" written on it. Click it and it will give you a dialogue box to enter your search string.