bal mainly but mapei is quite good too.and i found that dunlop is ok, infact very underated.

Benfer Leaderflex

without sounding to old in 20 od yrs tried pretty much everything if u really want to know how good your adhesive is is see how easy it comes off your cloths after they have been through the washing machine at high temp if the adhesive is still there u know its good personally i stick to nicobond white floor adhesive holds up well and sticks like **** to a blanket on wood floors i use wf21 so good it will stick **** to a bar of soap i only do natural stone now and have done for the last ten yrs so as for ceramics i havnt a clue whats the best about at the moment mark

Originally Posted by Dan

Nobody uses dunlop so far then.

Taylors gave me a tub of dunlop to try out and let them know what i thought, i haven't bought a tub since and never will, i'll stick with granfix, 'good stuff'

Originally Posted by Dan

Nobody uses dunlop so far then.

dan i am just starting in the game.My neighbour has just had her bathroom done and i noticed that the tiler was using dunlop non slip!
is this cheap rubbish and will her tiles stay on?

has anyone used pci nanolite and if so what did u think of it?

Originally Posted by Jason35

dan i am just starting in the game.My neighbour has just had her bathroom done and i noticed that the tiler was using dunlop non slip!
is this cheap rubbish and will her tiles stay on?

Dunlop adhesives are made by BAL, nothing rubbish about it, if fixed properly your tiles will stay on...lol

does anyone know the best way to price jobs when you are first starting out cheerz!

Originally Posted by GazTech

Dunlop adhesives are made by BAL, nothing rubbish about it, if fixed properly your tiles will stay on...lol

thanx for that gaz much appreciated!

Originally Posted by Jason35

does anyone know the best way to price jobs when you are first starting out cheerz!

Yes Jason, but this isn't the place to ask, this is an adhesive poll thread. Go to the home page and click the pricing forum....Gaz

Originally Posted by GazTech

Yes Jason, but this isn't the place to ask, this is an adhesive poll thread. Go to the home page and click the pricing forum....Gaz

the pricing forum is a sub-forum to the tilers arms.. you need access to the arms to post in the pricing forum.....

Any questions just post them in the tiling forum until you have access to the arms...

Originally Posted by Dave

the pricing forum is a sub-forum to the tilers arms.. you need access to the arms to post in the pricing forum.....

Any questions just post them in the tiling forum until you have access to the arms...

Dave i tried to get into the pricing forum but couldnt get access
just want to find out how to price jobs as i am just starting out and want to know how to price jobs before i start quoting people! thanks

Originally Posted by Jason35

Dave i tried to get into the pricing forum but couldnt get access
just want to find out how to price jobs as i am just starting out and want to know how to price jobs before i start quoting people! thanks

like i said you need access to the tilers arms to get access to the pricing forum........

pm me or Dan your company details etc.... just to make sure you are indeed a tiler etc etc.....then we can let you in......

A listing with findtrustedtradesman or yellow pages or summit will do....and we do check the details sometimes.....

Mapei is a nice little Canadian company.
I have used their products for 20 odd years and haven't had a single issue arise from the product.
Spec it properly, mix it right and it will perform.

I have also used custom building products gear and it stands up well and is priced right.
Custom Building Products :: Professional Contractors :: VersaBond Flex(R)

Flextile makes a good product, but I am not too keen on their grouts.
Their admix for exterior makes it impossible to clean a bucket which you might have missed washing.
http://www.flextile.net/cera_add_43.htm

TEC has a good range of products.
http://www.tecspecialty.com/

Laticrete is my current favorite up with Mapei.
LATICRETE® International > Contractors

I can get all of these in Alberta and they are all very competitive in their pricing.
Some of their specialty products are pricey, but I pass that on to the customer as I am not keen on subsidizing anybodies tile project.

Mapei is Italian

Originally Posted by Alberta Stone

Mapei is a nice little Canadian company.

Founded in 1937 in Milan, Mapei is the world's largest manufacturer of adhesives for the construction industry

quote from MAPEI


he's right ya know - it seems their Italian!

Paul

I've been using Weber Howtex mostly. Because its what my tile shop recommends. Mostly using powdered stuff, so far very happy with it. Only problems I've encountered are the rapid set spf going off a bit too rapid for my slow noobie hands. Though its still good. Liked the Thick bed very much, as its a bit slower setting and can cope with building up uneven floor surfaces really well. Used it on my own floor at home inside and out, building up some areas by as much as 25mm. Worked a treat.

Have also used Ardex for a shower - my own - which was excellent but very expensive. I don't think I was getting any trade discount at the time though. The howtex is around £17 a bag which I think is really good for fully waterproof, flexible etc.

I've used BAL white star, which was great. But I don't think its waterproof (doesn't say so on the tin) so I don't have much call to use it.

As most of my work is wet room based and nearly always included u/f heating. I need fully flexible + waterproof stuff.

Paul

well god damn, who knew?!
I had heard people saying it was based in Montreal and I never did research it.
Just took the scuttlebutt as fact.
I like their products though.
The HPG waterproofing is a nice fairly recent addition which I use in areas which I think will get moisture (under the dishwasher, around toilet flanges, beside tubs and showers, in front of doors)
You can scoop it out with a trowel and roll it with a small roller to even it out.

This site is invalueable im learning all the time, but a mountain of knowledge still to pick up

cheers lads !!!!!

I use Biscem products no problems
Gazza

Need more than one option

For floors we use weber or on occasion BAL or Dunlop.

For walls we use Palace mainly although they are increasingly sending us bad batches and so we often have to order in another brand.

Used Granfix for a few months but found it to be quite slippy and their white grout I didnt like.

Originally Posted by pt44

Only problems I've encountered are the rapid set spf going off a bit too rapid for my slow noobie hands.

Exactly why we use weber can get back on it to grout very quickly!

Adam Try Biscem Showerproof very good none slip and hold big tiles

Gazza

Originally Posted by Gazzatile

Adam Try Biscem Showerproof very good none slip and hold big tiles

Gazza

Thanks, I will look into that. Palace on the whole make a very good, pretty cheap product, but its always good to have a back up plan

Try mapei Bolter, Thats good stuff. Do like the palace cement addy really creamy, Don't use the bicem powdered adhesive, last time there was me pulling a lump out the bag as big as my hand

Originally Posted by Jason35

dan i am just starting in the game.My neighbour has just had her bathroom done and i noticed that the tiler was using dunlop non slip!
is this cheap rubbish and will her tiles stay on?

alot of people are slagging dunlop of its decent stuff and quite cheap and its made by bal so it cant be that bad

Dave where's the best place to get BAL products from in our neck of the woods

Originally Posted by Dave

BAL all the way for me.................

Originally Posted by Lee1973

Dave where's the best place to get BAL products from in our neck of the woods

CTD.....where abouts are you..?...i could get you sorted with a trade account...

Originally Posted by Dan

Nobody uses dunlop so far then.

Is dunlop really BAL in a diffrent tub, if not what is missing from dunlop.

I use green star, white star and Granfix for floors,

Dont like Webber adhesives though.

Make mine a cold one.

I'm over in Jarrow Dave, out the Army in 3 weeks, just spent a wad on tools from NETT, funny you should mention CTD I applied for a trade account about a month ago but haven't heard anything back I presumed it got lost in the post so I was going to get another trade account form. Do you have contact with them? I'd appreciate any help

Originally Posted by Dave

CTD.....where abouts are you..?...i could get you sorted with a trade account...

Tel : 01325 483414 and tell them Dave howe told you to phone to set up a trade account....mention the forums lee........if you phone t/moz ask to speak to phil johnson ( the manager) he will help you no probs...