Totally racking my brain here trying to figure this out after reading so many threads til the early hours of this morning!

I'm using tile backer boards which are to be Dot & Dabbed and mechanically fixed to concrete walls.
To my understanding Keraquick adhesive will be good to use (please confirm)

One part of the room will be a wet area/room which will be tanked.

Tiles used will be Ceramic 600x300. I've read Keraflex would be ok to use but on the net it says Floor Tiles and not Wall tiles.

So what do I use? Would Keraflex be ok?
My understanding is it needs to be flexible and have a reasonable fixing time.

Sorry I know this has been asked so many times but my head is thumping trying to figure it out.
Doesn't help having the backer boards delivered 2 days late

http://www.mapei.com/public/GB/produ...eraflex_UK.PDF

Yep, Keraflex will be fine..

Maybe some pics of the job in progress and completion would be nice..

Thanks Dave.
I will do some pictures as I go along and pop them up here as a thank you for the advice. I'm only a DIYer so the pressure is on to get this right first time otherwise I can see some of you Pro's picking holes in my work! haha!!

Originally Posted by Gilbz

Thanks Dave.
I will do some pictures as I go along and pop them up here as a thank you for the advice. I'm only a DIYer so the pressure is on to get this right first time otherwise I can see some of you Pro's picking holes in my work! haha!!

the best thing you can do mate is just take your time,don't rush anything,thats when mistakes happen.
and if you become stuck,just ask on here,some excellent tilers on here

Ditto what wilder says Time should not be an issue when its your own.
good luck and remember the piccys.

Well I'm in no rush! Problem is this bathroom holds the only toilet and show/ bath in the whole bungalow and having 3 kids means doing sections at a time! I love DIY and have transformed the whole place...... bathroom is the last room I have to do!