Hi peeps, I have a job installing Basazza glass mosaics they are 10mm paper faced on a 300x300 sheet. the specs are to use mapei addy and Basazza are supplying there own grout.
I am tiling onto wedi board and it is in a wet room!
I havent used much mapei as its not that readily available down here so which addy would you reccomend?
thanks in advance...

http://www.mapei.com/public/US/produ...P10_TDS_EA.pdf

http://www.mapei.com/GB-EN/product-d...1611&IDLinea=1

Originally Posted by Sir Ramic

http://www.mapei.com/public/US/produ...P10_TDS_EA.pdf

WOW that was quick

Nice to use brilliant white adhesive .

Looks like P10 with the keraply additive as its got more body jets that you can shake a stick at and its got a waterfall in the wet area too!!! oh and the Basazza mosaics are being made especially with a persons head and face murial in it !!!

hi steve
adesilex p10 as neale mentioned but i have used keraquick white, with latex plus in the past and mapei have said that was adequate so its an alternative if you have and bags of keraquick in storage!

Nice job P....will be looking for pics as you go.

Nice job it shall be. the panel murial in the book is approx £5000, but as its being altered/changed to suit the customers requirements its gonna cost near the £8,000 mark for just one panel thats with out the rest off the walls

So theres absoloutley no pressure in getting this absoloutley perfect none at all

oh and I hate paper faced mosaics at the best off times

Now this is just the shower wall areas that is being done in this and the rest off the floors are in limestone with a big mixture of pebbles in the floor too!

This is going to be a long job as there is shapeing and bull nosing to be done..

This will be good for my portfolio

p10 is amazing adhesive you will love it. sounds like a nice job

That should be fun!

I take it you will be smoothing over the screw/washer plates in the wedi.
Better hope the joints are 100% flush!

cant wait to see the pic's peck's

will take pics as i go and will post them when the job is under way!!

Originally Posted by ukProTile

That should be fun!

I take it you will be smoothing over the screw/washer plates in the wedi.
Better hope the joints are 100% flush!

The joints will be flush as im installing the wedi and doing the prep myself! all screw and washers will be taped over using the wedi waterproof tape!

Sounds excellent and better than painting hey! Looking forward to another quality set of pics Steve