What lovely stuff....18 bags used and lovely finish to the floor. Nice price too.

I've to get some to try out foc from a local supplier Neale, is it suitable for ufh?

What's the difference between this and the normal stuff Neale?

Originally Posted by doug boardley

I've to get some to try out foc from a local supplier Neale, is it suitable for ufh?

yes Doug and only needs water.

Originally Posted by Dan

What's the difference between this and the normal stuff Neale?

You can go onto wooden substrates with Dan...not that I was, but cracking stuff.

got a link m8

Originally Posted by deanotile

got a link m8

Better still
ultraplan renovation_uk.pdf

I have been using this for a while now.. excellent SLC..

does it need much trowelling?

Originally Posted by doug boardley

does it need much trowelling?

Not really.. just push to depth and leave.. has an excellent flow rate IMO.

Originally Posted by Dave

Not really.. just push to depth and leave.. has an excellent flow rate IMO.

Ditto !

Is it pricey? I like the Mapei slcs but they seem to be way over the top on the price.

i'll have to give that a go!!
whats the max depth it can go to neale/dave

I think it can go to 30mm each application

Originally Posted by AstonTiling

i'll have to give that a go!!
whats the max depth it can go to neale/dave

3mm to 30mmm.
I have attached the spec sheet earlier in this thread.

Prices are great but cannot be said in public forums..

Lets say half the price of fibre plan..

Originally Posted by Dave

Prices are great but cannot be said in public forums..

Lets say half the price of fibre plan..

now you're talking!

Just read through the spec sheet, and it mentions that MapePrim Sp or Eco Prim T should be used as the primer............ any reason why I cant use my usual Primer G???....... only just bought another 10 litres (2 tubs) and have a few floors lined up

I might try some tomorrow or saturday, i have 36m2 of tiles to lift so who know what the underside will be like.lol.

Originally Posted by blocko

Just read through the spec sheet, and it mentions that MapePrim Sp or Eco Prim T should be used as the primer............ any reason why I cant use my usual Primer G???....... only just bought another 10 litres (2 tubs) and have a few floors lined up

I've just read through the spec sheet aswell and after speaking with Mapei they advise the surface should be primed first. Is this necessary? Especially in our situation which is over UFH and insulation boards?

Did you tell mapei tech that it was over UFH and insulation boards ?

Hi Guys
I've been follow your forum for ages and now it's time to start posting .
I used some Ultraplan Renovation Screed today and it's great stuff ,great flow ,great spreading,great price .It looks like it will replace Fibreplan ( forgot to ask Mapei guys and why it's a half price of it ) for good
I had a issue regarding primer to use on ply before applying this new stuff ,Mapei suggest to use Ecoprim or Mapeprim ( both water based )- really expensive as a primer but after conversation with
Mapei technical support they confirmed Primer G ( resin based ) should be OK as well .

Because Fibre plan has to be imported from Italy.. Renovation screed SLC is made in the UK , hence lower costs.

Hi Dave
Thanks for the quick reply ,now I know why .
Cheers

Iv used a good bit of it myself, very nice to use.