Anyone used it..

from Tile Giant there own brand as such

Its good stuff actually. Not much different from the keraquick, but not as modified. Its a lot cheaper and has a good pot life whilst still maintaining a 2 hours grout time. Give it a go, have you got an account set up?

Not yet, would that make any difference on price Scott

Yes! Register online and they can set it up for you plus you get a bit extra for being a TF member as far as i know

how much for a bag of that adhesive guys?

I'll try that

Yes I have used it a number of times. I liked it.

Isnt this Mapeker re-branded/ bagged???? If Im correct, it is great to use

I'm sure it's just mapeker branded in TG logos.

I used some when it first came out. Was nice to work with from what I remember

used it recently its good stuff

Used ot today, takes longer to set than Keraquick and in my opinion not as good as Keraquick if your after total peice of mind.

As mentioned it is based on Mapeker. Not as flex as Keraquick.

Your right, it's the same stuff!! With tf discount it's almost 60% cheaper per bag

Picked up a bag this week courtesy of Mapei at a product demonstration evening at my local TG. It is mapeker rebranded as confirmed by the rep. Can't be used with latex plus and not suitable for UFH. Used it yesterday and will be using again.

Originally Posted by prntiling

Picked up a bag this week courtesy of Mapei at a product demonstration evening at my local TG. It is mapeker rebranded as confirmed by the rep. Can't be used with latex plus and not suitable for UFH. Used it yesterday and will be using again.

I think you are incorrect with that..... Mapeker was always recommended as suitable for UFH, so this should be no different at all

Mapeker is suitable for UFH and now suitable for plywood overlayed floors ( bs5385 min)... It is now called mapeker flex.. keep up lads..

It is as flexi as keraquick imo but keraquick is the one to mixture with latex plus to achieve an S2..

MAPEKER RAPID SET FLEX


Technical Data Sheet
English


Rapid Setting Flexible Adhesive
• Ceramic & procelain tiles
• Use with underfloor heating encapsulated
in a levelling compound
• Use with plywood overboard (min 15mm)
• Ready to grout in 3 hours

Originally Posted by prntiling

Picked up a bag this week courtesy of Mapei at a product demonstration evening at my local TG. It is mapeker rebranded as confirmed by the rep. Can't be used with latex plus and not suitable for UFH. Used it yesterday and will be using again.

You are partialy correct matey,

It is fine for cable heating once slc over but, it is not reccomended by Mapei for hot water piped underfloor heating.

It is also not suitable for installing agglomerate stone.

it is not reccomended by Mapei for hot water piped underfloor heating.

Can i ask where it states this please..?

Mapeker flex is a C2f.. so IMO totally suitable for heated screeds.

I dont know if it is stated in the bag Dave but, I have read it in Literature previously. I have a copy on my email somewhere.

It might be on the older Mapeker literature but new Mapeker is now a c2f flexi.. but any info you have would be great..

Can i just say... my advice goes for the Mapei Mapeker flex and NOT pro flexible from TG.. It is just a comparison of what pro flexible is ..adhesive wise but not actually one in the same adhesive.. pro flexible doesn't do all that Mapeker flex will..

Thanks to tfs for the info on pro flexible..

Just going by what I was told. Not got the bag anymore so can't confirm but sounds like tfs has cleared up the issue