Hi there, I have recently started using Mapei which mapei addy would you use for mosaics a mixture off glass and porcelain varying sizes from 25mm to 50mm 8mm thick with steel fronts over the porcelain backs?

Also which grout would you use i dont want it to scratch the s/steel?

Thanks peoples...

p.s substrate is plasterboard..

hi pecks

i have used either keraquick with some latex plus or adesilex p9 when fixing glass mosiacs and porc..
ultra colour plus grout is fine. i fixed some polished stainless steel 100x100 tiles a few weeks back and i went easy and just pushed the grout into each joint as opposed to going over the whole area..

ed

Mapei P9 is a great adhesive and mapei P10 is a designated glass mosaic one..

Originally Posted by AstonTiling

hi pecks

i have used either keraquick with some latex plus or adesilex p9 when fixing glass mosiacs and porc..
ultra colour plus grout is fine. i fixed some polished stainless steel 100x100 tiles a few weeks back and i went easy and just pushed the grout into each joint as opposed to going over the whole area..

ed

Going over each joint as opposed to spreading the whole area on mosaics, I wont have time to get on here for a year

i meant on the row of polished stainless steel 100x100's i did you cider drinkin worzel
dear me lol

P 10 is great nice and white

I use P10 aswell with Mapei Isolastic (mixed 1:1 with water then mixed with P10)

missyT

I enquired about the p10 once, turns out to be a bit more pricey than some of the others. Im sure it worked out at around £30 to trade double the price of keraquik.

I reckon P9 would be a good choice if you wont a cost effective slow setting addy that is up to the job.

White standard powder with sbr, thats what Bizzaza use for there tiles.