i've an area of 2sq mtr to level, drop of 15 mm corner to corner and am considering using levelflex, will a 20kg bag do this? whats the minimum depth at high point?

Hi aph257,

I've used Tilemaster Levelflex a few times now, the coverage is usually 5m2 per bag at 3mm thickness approx., your minimum thickness at the high point should be 3mm, at 15mm thickness you would get 1m2 coverage, so you would need 2 bags to cover the area if it's all at 15mm depth. I hope that helps.

Do you find the levelflex very wet Ken?

Originally Posted by hillhead

Do you find the levelflex very wet Ken?

Yeah man, you really have to baton it off at kitchen units to stop it running away, and even then it sometimes gets through any small gap underneath, and I do mix it to the recommended amount. But when it goes off, boy oh boy is it hard to grind down with a carb stone!, so I try to get it bang on each time to save sweating later on. Good gear though once it's in place imo. .

And it can be built to 50mm !!! great stuff

Definitely, get's a bit pricey at that thickness though

still under 20 quid at that 50mm !!!

Blimey, I need to change my supplier

£16 a bag at www.trades-direct.co.uk