hi i want to dab and dot plasterboard to bare brick wall in my bathroom.
ideally i would like something that gives strong hold and drys in 24 hours before i can tile.
so..
what is the best adhesive to use?
do i need to prime the brick wall first? if so with what?
which side of the plaster board dose the adhesive go?
do i dab on wall and stick the board, dont know how much adhesive i will need apply.

i need to be sure, so sorry if questions are sounding daft.

thanks

drywall adhesive mate, sold at builders merchants

D&D..just like this..

[ame=http://www.youtube.com/watch?v=8pssxkpXEb8]YouTube - dabbing in style[/ame]

this is the stuff

god than's a poor demonstration not enough, dab's, not very well bedded into them crap imo

it didn't look to bad to my gooner, got plenty of dri wall top and bottom, possibly could 've done with another row of dabs in the bottom third, but he gave the boards a good whack with his straight edge to bed them (imo)

he hit it like a girl,and still not enogh dab's

Bad dot and dabbing, far to many gaps in the vertical line, no sealing to the ceiling line to stop air flow behind the boards on the wall.

He must be on a naff price

Thank Guys, i get the idea.

do i need to prime the brick wall first for a strong hold?

not the best agree not enough dot and dab strait edging was useless and sheets seem to be sat directly on floor

hi
i am going to dot and dab plasterboard on bare bathroom brick wall
do i need to prime the brick wall first for a strong hold?

if so what with?

thanks

Just make sure the brickwork is clean and dampen the wall where you will be putting dabs of adhesive

what adhesive do you use directly onto plaster board? tub addy!. do you need to prime the boards?

Tubbed gear should no problem but read instructions, powdered addy I would prime