hi all just a bit of info if you please. Tiling a hall way 7.4M2 substrate is clean concrete and level what is the best addy to use will i need to use flexi?? also what is the best way of setting out how would i find a level line without a chalk line any ideas would gratefully be accepted. tiles are from B&Q( i know not very good but customer got them) 330x330. cheers

Originally Posted by turtle-tiling

hi all just a bit of info if you please. Tiling a hall way 7.4M2 substrate is clean concrete and level what is the best addy to use will i need to use flexi?? also what is the best way of setting out how would i find a level line without a chalk line any ideas would gratefully be accepted. tiles are from B&Q( i know not very good but customer got them) 330x330. cheers

if its a concrete floor you shouldn't have any probs with rapid set no need for flexi,you could centre it by dry laying it and using a main door way as your reference point for centre,this is how i would set it out if there is several doors leading from the hall!

Cheers for reply dave much appreciated mate will do what you said makes sense really with three door ways in the hall. Thanks again

with DC on that one ninja

cheers dougy mate i know there is two good lads out there now cheers

Just try to get your cuts central and as big a cut as poss to the walls etc...

You say the tiles are 330 x 330 but not what type they are......might need a flexi if porcelain biscuit etc... and flexi grout...check what the tile is before you buy materials..