I see Bal are now have brought out a single part fastflex, Any one seen it or even used it........????

Originally Posted by whitebeam

I see Bal are now have brought out a single part fastflex, Any one seen it or even used it........????

It's so new it isn't even on the BAL website yet.........

not sure if its any good on wood yet because of the slow setting time might be a moisture problem lets wait and see :Pete

BAL SINGLE PART FASTFLEX

is a highly flexible one-part elastomeric tile adhesive for floors.
It has all the product benefits and uses of the 2-part Fast Flex system with the added benefits of being an
easier to mix single part solution, can be used to improve tiled floor sound reduction and also has new

smaller sizes available

(5kg).

•

Rubber-like flexibility: Elastomeric

•

Fast setting – grout after 5 hours

•

Highly frost / water resistant

•

For tiling subject to movement / vibration

•

Use as isolating, anti-fracture underlay for ceramic tiles

•

Suitable for most tile types including porcelain

•

‘Go greener’ eco-friendly product - use of over 10% of powder using recycled rubber filler

USE FOR
Most types of WALL and FLOOR tiles

including:

��

Ceramics

��

Porcelain and fully vitrified tiles

��

Mosaics

��

Natural Stone including marble

��

Slate

Most substrates

including:

��

Asphalt (suitable grade e.g. flooring)

��

Concrete, cement:sand screeds and rendering

��

Existing vinyl tiles, unglazed ceramic tiles, quarry tiles, terrazzo and natural stone

��

Fibre reinforced cement boards and lightweight tile backer boards

��

Tongued and grooved floorboards

��

Underfloor heating
Other substrates that may be suitable include:
Single layers of chip / ply, floating timber floors, Steel, GRP, Epoxy coatings and glazed tiles

INTERIOR and EXTERIOR

floors / DRY and WET environments

new product bulletin

single part
fastflex

KEY INFORMATION:
LAUNCH DATE: MONDAY 8

TH DECEMBER 2008
PRODUCT CODE: 2236-203 (5KG), 2236-202 (12.5KG)
SIZE: 5KG and 12.5KG / GREY
UNIT OF SALE: 1 x 5KG, 1 x 12.5kg (BAG)

Building Adhesives Ltd, Longton Road, Trentham, Stoke-on-Trent, ST4 8JB,
England.
Tel: +44 (0) 1782 591100

www.bal-adhesives.com

5hr set time pete.......surely wbp ply can withstand that...lol lol.....

Originally Posted by Dave

5hr set time pete.......surely wbp ply can withstand that...lol lol.....

LOL

Other substrates that may be suitable include:
Single layers of chip / ply, floating timber floors, Steel, GRP, Epoxy coatings and glazed tiles