Just Checking...

[matt_sx]

I'm a DIY'er

For my WP1 tanked walls in my bathroom which will be tiled with porcelain:

Bal whitestar adhesive?
Bal Superflex wall grout?

For my WBP floor in the bathroom tiled with porcelain:

Primed with Bal APD?
Bal Grip adhesive?
Bal Superflex Wall Grout?

Does that sound right?

[whitebeam]

Wall, single part flexible, Grout superflex as mentioned
Floor, As above and Bal superflex wide joint grout

[matt_sx]

Originally Posted by whitebeam

Wall, single part flexible, Grout superflex as mentioned
Floor, As above and Bal superflex wide joint grout

Thanks for the fast reply

As for the superflex wide joint for the floor, does that still apply if i'm using 2mm spacers?

Many thanks

[Dave]

NO NO NO.........do not use BAL grip on the floor..........it needs to be a cement based flexible adhesive............

Whitebeam you plonk..

[SW.Tiling]

Originally Posted by matt_sx

I'm a DIY'er

For my WP1 tanked walls in my bathroom which will be tiled with porcelain:

Bal whitestar adhesive?...................Bal single part flex
Bal Superflex wall grout?..................Superflex as mentioned

For my WBP floor in the bathroom tiled with porcelain:

Primed with Bal APD?..............................OK
Bal Grip adhesive?..................................Bal single part flex (same as walls)
Bal Superflex Wall Grout?.........................Bal superflex FLOOR

Does that sound right?

No tubbed adhesive for the floor at all

You can use single part rapid set on the floor if your feeling brave...........and quick

[matt_sx]

Originally Posted by Dave

NO NO NO.........do not use BAL grip on the floor..........it needs to be a cement based flexible adhesive............

Whitebeam you plonk..

Can you please link me to that on the bal site, I can't see it

Many thanks

[Dave]

If using BAL cement based adhesive on a ply subfloor then only prime the back face and the edges with BAL sbr neat and do not prime the face side.......tile straight onto it...

[Dave]

Originally Posted by matt_sx

Can you please link me to that on the bal site, I can't see it

Many thanks

you will find all the info for BAL products here.... BAL - Building Adhesives for the Trade

[matt_sx]

Originally Posted by CJ again

No tubbed adhesive for the floor at all

You can use single part rapid set on the floor if your feeling brave...........and quick

I'm not that brave so any slower setting!! i've tiled a few times but need to take my time

[matt_sx]

Originally Posted by Dave

If using BAL cement based adhesive on a ply subfloor then only prime the back face and the edges with BAL sbr neat and do not prime the face side.......tile straight onto it...

I have read that through searching , JEEZ, wishing I didn't use so many screws now

[Dave]

Single part flexible from bal is slow setting ( 16hrs ) and has a pot life of about 5hrs...so you will be fine...

[grumpygrouter]

Originally Posted by Dave

NO NO NO.........do not use BAL grip on the floor..........it needs to be a cement based flexible adhesive............

Whitebeam you plonk..

I think he was refering to the "as above " reference to SPF in his reply Dave