General opinion on expansion joints regarding floor areas??? - Tile Advice

[Olde Navy]

Dear all
Got an 8m x 10m floor to tile which is a new screed with wet UFH system (that has been tested)
I plan to use durabase matting but I've had mixed feedback as to the requirement of an expansion joint. There are no joints in the floor at the moment.
The majority opinion, so far, is the the short side i.e. 8m is on the limit of acceptable so no need for joint in the middle of the tiles. Obviously I'll leave an expansion gap around the edges.

Look forward to your opinions
Cheers
Mike - Olde Navy

 

[Italy]

Tile,stone, size?

 

[Olde Navy]

the tiles are 600x600 porcelain

 

[Olde Navy]

and I'm assuming the customer will be ok with 2mm spacing. I'll use the T-Lock system as this seems to give me the best results!

 

[Ajax123]

3mm grout gaps 10mm round perimeter no further joints needed

 

[Olde Navy]

Ok thats great news - thanks for feedback so quickly

 

[Dan]

Welcome to Tilers Forums

Let me know if I can be of any assistance around the forum.

 

[Olde Navy]

3mm grout gaps 10mm round perimeter no further joints needed

Hi
Thanks for your advise... how about the requirement for expansion joints at the edges in small rooms, such as a shower room floor ?