Cutting Tile Trim | 3 Way Mitre with Pictures - Tile Advice

[honza1]

I saw this in WestEnd last week and thought I could post it here as an alternative.

Any way quite rough job that was.

 

[DHTiling]

Not the best joint there but i use those corners all the time with metal trims...

 

[honza1]

I saw this in WestEnd last week and thought I could post it here as an alternative.

Any way quite rough job that was.

I did not do the job I just took the picture on the toilets to shear it with you here.

 

[Nkayjay]

Fantastic! Thats great!

 

[Matt]

I'm so glad I saw this thread. I spent hours trying to figure this out. Thanks!

 

[pdhewitt]

Thanks Mark - handy reminder how to do it!

 

[nybor62]

just buy some corners if they do them for the trim you are using

 

[mic]

Cheers for that, coming from a plumber taking on his first tiling job

 

[Ken Bruty]

top post, not seen that done before.

 

[andyroogolf]

Bored at work nothing to do except worry about doing a 3 way mitre on tile trim and here is the answer can't wait to get home and try it! Thanks for the diagrams/pictures Devonmark:hurray:

 

[ScottG13]

Thanks for that, great post. Had a play with some trim a while ago and had a midnight mitre up!

 

[macten]

Must admit I'm with Dave and only 3-way plastic trim, use the pre formed corners on metal as they can be really sharp and filing them down looks rough on metal.

 

[Ken Bruty]

Did my first 1 two weeks ago, my customer was well impressed :smilewinkgrin:

 

[Chris Rayson]

int it easier to use Genesis corners

Genesis corners only work with Genesis trim

 

[The Legend; Phil Hobson RIP]

Genesis corners only work with Genesis trim

Most trim manufacturers do them (Genisis, Homelux, Tilerite. etc) much easier than the three way manual method, as good as it is.