Welcome to Tilers Forums Tiling Forum


The UK's Biggest Tiling Forum for DIY and Professional Tilers; find


  •  » Tile Advice for Bathroom Tiles, Kitchen Tiles, Wall Tiles, Floor Tiles
  •  » Customers can Find a Tiler, or Wall and Floor Tilers can Find Customers
  •  » Tiling Tools, Tile Adhesive, Tile Grout and other Tile Products
  •  » Advice and Discussion related to Tiling Courses and Tiling NVQ's
  •  » Professional Tilers can find Business Advice, Discounts, Trade Accounts

DIY and Professional Wall and Floor Tilers are Welcome


Advice from by Tilers, Manufacturers, Distributors and Tile Suppliers


REGISTER HERE FOR FREE


p.s.: Registered members will not see this ad

Results 1 to 2 of 2
Discuss Marmox for wall panels - 12.5 or 10mm in the Tanking & Wetrooms at TilersForums; Guys, im going to board out the bathroom with marmox I was going to use 12.5mm.. but would 10mm be ok to use? will be tiled on obviously.. not huge ...
          
  1. 07-07-2011 #1
    davemul
    davemul is offline
    Regular TilersForums Contributor davemul's Avatar
    Join Date
    May 2011
    Location
    Kent
    Posts
    442
    Thanks
    63
    Thanked 64 Times in 57
    Posts

    Default Marmox for wall panels - 12.5 or 10mm

    Guys, im going to board out the bathroom with marmox

    I was going to use 12.5mm.. but would 10mm be ok to use?

    will be tiled on obviously.. not huge tiles.. say 600x400 ?

    thanks

    Dave
    Reply With Quote Reply With Quote
  2. 07-07-2011 #2
    Stewart
    Stewart is offline
    TilersForums Trusted Member

    Stewart's Avatar
    Join Date
    Aug 2010
    Location
    Dunfermline.
    Posts
    4,747
    Thanks
    437
    Thanked 1,203 Times in 965
    Posts

    Default

    If you're installing it onto stud work, then I would use the 12.5 mm and 10 mm if the substrate is solid...
    "The early bird catches the worm.... but it's the second mouse that gets the cheese"
    Reply With Quote Reply With Quote
« Wetroom help, builders did an off! | UFH in a wet room »

Similar Threads

  1. Laying down 10mm Marmox boards on floor
    By ap222 in forum Tile Adhesive, Grout and Substrate Preparation
    Replies: 1
    Last Post: 19-07-2010, 09:54 PM
  2. wall prep for 10mm porcelain
    By aflemi in forum Tile Adhesive, Grout and Substrate Preparation
    Replies: 10
    Last Post: 13-04-2010, 09:48 PM
  3. 10mm trowel on wall.
    By FreeD in forum Tiling Forum
    Replies: 42
    Last Post: 04-02-2009, 01:08 PM
  4. 1st Job: Wall runs out by 10mm over 4metres!
    By Rosco in forum Tiling Forum
    Replies: 16
    Last Post: 04-02-2009, 12:37 PM

Visitors found this page by searching for:

marmox 10mm

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Tilers Forums is the UK's largest wall and floor tiling forum. Advice is provided free of charge to all users. Tilers Forums does not take responsibility for any loss or damage caused due to following advice found on this forum. All wall and floor tiling should be carried out by a qualified wall and floor tiler. Views expressed on this forum are of the users and not Tilers Forums. Views expressed on this tiling forum are of the contributor only and not the forum as a whole. Not all views should be taken as fact but simply the opinion of the person posting. Readers are reminded to seek professional advice before undertaking any wall and floor tiling project.

Tilers Forums is a Trading Style of Untold Developments Ltd. Search Engine Optimisation, Web Development and Online Marketing for the UK.
DMCA.com
[Output: 55.58 Kb. compressed to 51.43 Kb. by saving 4.15 Kb. (7.47%)]

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28