Welcome to Tilers Forums Tiling Forum


The UK's Biggest Tiling Forum for DIY and Professional Tilers; find


  •  » Tile Advice for Bathroom Tiles, Kitchen Tiles, Wall Tiles, Floor Tiles
  •  » Customers can Find a Tiler, or Wall and Floor Tilers can Find Customers
  •  » Tiling Tools, Tile Adhesive, Tile Grout and other Tile Products
  •  » Advice and Discussion related to Tiling Courses and Tiling NVQ's
  •  » Professional Tilers can find Business Advice, Discounts, Trade Accounts

DIY and Professional Wall and Floor Tilers are Welcome


Advice from by Tilers, Manufacturers, Distributors and Tile Suppliers


REGISTER HERE FOR FREE


p.s.: Registered members will not see this ad

Results 1 to 3 of 3
Discuss Using two layers of Marmox Boards in the Tanking & Wetrooms at TilersForums; Hi, Flooring a wetroom and planning to use 20mm Marmox ray and boards but I don't have enough room under existing floor for shower waste and pipe so was thinking ...
          
  1. #1
    New TilersForums Contributor lylemes's Avatar
    Join Date
    Sep 2010
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0
    Posts

    Default Using two layers of Marmox Boards

    Hi,
    Flooring a wetroom and planning to use 20mm Marmox ray and boards but I don't have enough room under existing floor for shower waste and pipe so was thinking of layering floor first with 50mm Marmox boards then laying down the Marmox 20mm tray and 20mm boards on top of the 50mm boards. Will this be OK or is their another solution I should be using.

    Thanks
    Lyle

  2. #2
    Administrator


    Dave's Avatar
    Join Date
    May 2007
    Location
    County Durham
    Posts
    54,464
    Thanks
    9,718
    Thanked 14,141 Times in 9,988
    Posts
    Blog Entries
    1

    Default Re: Using two layers of Marmox Boards

    If you use the Tuffdec2 tray it has a very shallow drain.. around 65mm or so.... and a lot easier to fit than Marmox IMO..

    Wetdecs.co.uk: Shop Online for Wet room, Screens, Tanking kits, Wet room shower tray formers. - Wet room shower trays :: Wood Floor Formers

  3. #3
    New TilersForums Contributor lylemes's Avatar
    Join Date
    Sep 2010
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0
    Posts

    Default Re: Using two layers of Marmox Boards

    Thanks for that Dave, good advice. Would you recommend other types of board other than Marmox ?

Similar Threads

  1. Fitting Marmox boards
    By Mcluma in forum Tile Adhesive, Grout and Substrate Preparation
    Replies: 14
    Last Post: 04-05-2010, 02:05 PM
  2. Marmox Backer Boards for shower enclosure?
    By dangertomyself in forum Tanking & Wetrooms
    Replies: 7
    Last Post: 03-12-2009, 05:37 AM
  3. Marmox boards
    By cct in forum Tiling Forum
    Replies: 5
    Last Post: 07-08-2009, 05:01 AM

Visitors found this page by searching for:

marmox boards floor

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Tilers Forums is the UK's largest wall and floor tiling forum. Advice is provided free of charge to all users. Tilers Forums does not take responsibility for any loss or damage caused due to following advice found on this forum. All wall and floor tiling should be carried out by a qualified wall and floor tiler. Views expressed on this forum are of the users and not Tilers Forums. Views expressed on this tiling forum are of the contributor only and not the forum as a whole. Not all views should be taken as fact but simply the opinion of the person posting. Readers are reminded to seek professional advice before undertaking any wall and floor tiling project.

Tilers Forums is a Trading Style of Untold Developments Ltd. Search Engine Optimisation, Web Development and Online Marketing for the UK.
DMCA.com
[Output: 62.18 Kb. compressed to 57.29 Kb. by saving 4.89 Kb. (7.87%)]

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28