Tanking Bath Surround? - Page 2 - TilersForums.co.uk | Tile Forums

wilfredolimb · 03-07-2008

cheers for replies,
access panel is also one of my concerns, I was thinking i'd have to make the whole side of the bath accessible, but looking at that image only shows a little bit.
Do i need directly under the tap to be accessed and the pump for the bath? (its one of those jet/whirl pool baths)

**wetdec** · 03-07-2008

Quote:

Originally Posted by Dave

B and bloody Q..

.....or you can buy this system from schluter.....

First, adhere an aluminium bracket to the back of each perimeter tile with tile adhesive so that the magnet extends beyond the tile’s edge.
Set tiles with the magnets attached as perimeter limits, so that four magnets extend into the access opening.
To form the access panel cover, connect the corresponding number of tiles by attaching a tile to their backs with tile adhesive.
Using silicone, adhere the counterplates to the back of the panel cover in alignment with the perimeter magnets.
After the silicone has cured, install the cover and seal the surrounding joint with a colour co-ordinated sealing compound.

I sell them Dave

Tiler

..

**Dave** · 03-07-2008

cheers tony..didn't know that.......( now i do

)