You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
heating
A central heating system provides warmth to the number of spaces within a building and optionally also able to heat domestic hot water from one main source of heat. It is a component of heating, ventilation, and air conditioning (HVAC) systems, which can both cool and warm interior spaces.
Hi there, hoping for some help here. I am about to install a small (2.2x2.5m approx) area of tiles in our utility. I am using 900x900x10 tiles and ideally would like to keep the junction with our kitchen floor (engineered wood) as flush as possible. That means there is approx 15mm depth to play...
Tiling a new extension. Cement poured screed on piped underfloor heating.
Heating has been commissioned, and turned off 48 hours before tiling. Fracture matting laid across all floor and started to tile.
But its so cold in here, the tiles I laid 2 days ago (customer supplied standard set S1...
Hello,
I have got the boarding down it is wedi board which had been stuck down with adhesive and screwed down also with extra metal washers.
Someone has now told me it is not a good idea to put an Electrical Heating Mat over it beacuse of the metal screwes and washers.
Can I just take them...
Hello. We're going to be installing large limestone tiles with wet underfloor heating in our kitchen/living area of the house. At the moment it's gutted and we have the opportunity to start from scratch as we're back to the joists. I'm looking to tile on to either 18mm routed cement boards or...
Hi guys
A little advice if possible
I have a bathroom 2.6 x1.9 on joists 18” gaps
New weyroc floor
Ufh is on spreader plates in between and a wet board flush into the area
So my question is decoupling mat or not ?
For this size area is it needed
Will there be that much flex?
There have been...
Hi guys, anyone tiled over this product? It’s polystyrene grooved product that heating pipes run through over laid with a metal fibred strong board. New product to me and would like any advice or procedures req prior to tiling. Can’t seem to find any info on it.
Hi,
I was advised by my builder to get spanish or turkish tiles for my 100 sq floor. I bought thinking I am getting Turkish porcelain tiles, however I received Indian porcelain tiles instead. My builder is not sure about the Indian tiles for underfloor heating. The Tiles company claims that...
uHeat and TilersForums.com go Way Back - And Continue to Partner-up to Bring You Savings on Electric and Water Underfloor Heating
Quite some time ago the founder of TilersForums.com ran a tiling training centre in Staffordshire, and sold electric underfloor heating there, mainly to the course...
Does anyone know of a foil backed board for underfloor heating, (with the inserts for white hot water pipes) that's suitable for tiling? I've said no but they (contractor) insist it's ok providing the primer is allowed to dry for 24hours, so against my better judgement I have primed Saturday...
hi all
i having my bathroom flooring installed with 18mm ply over the entire floor joists
then add 10mm warm up insulations boards Insulation Boards for Underfloor Heating | Warmup UK - https://www.warmup.co.uk/underfloor-heating/insulation/boards
then add the warm up heating mat DCM-PRO -...
Isn't it about time we stop installing wired underfloor heating? Despite best practise, it always fails. It always does. It might last 10 years. The likelihood it lasts about three. Seems like a complete waste of time.
Looking for a tiler to lay a Kitchen Floor with 60x60 porcelain tiles. Floor is a screed concrete. Floor area is aprox. 22m2. We would like to have electrical underfloor heating installed at the same time. Any recommendations are very welcome. Job can start at any time. The sooner the better...
Hello,
I am looking for advice. I am intended to lay Marble stone with wet underfloor heating in my living room and hallway. I have suspended floor with 100mm joist. What could be the best possible and cost-effective way to get the right solution.
I have planned to put the 50mm PIR between the...
Hi
I am want to get my new build kitchen floor, hallway and utility tilled. I am plaining on having Underfloor heating installed in my kitchen an have bought a mat based underfloor heating system with insulation boards(Xp pro insulation board by prowarm) . I got quotations form several tilers...
Hi anybody tiled directly onto the aluminium Wunda boards . I searched and googled for ages before doing this job and done everything by the book . Primer ,s2 adhesive ,, butter the tiles ect ect . Finished phase one and it just doesn’t feel right under foot . I’m an old school 53 year old and...
Need some advice in regards to impey tile safe membrane. I have stupidly put the underfloor heating down then self levelled over it up to the level of the wet dec assuming that the membrane would be the last layer 😐😐😐. Am I going to be ok like this as I now know impey don't recommend it or am I...
We are underfloor heating and gas engineers and are experts in the installation and maintenance and repair of these systems in London and nearby locations. There are lots of heating engineers who offer underfloor heating as one option of many other heating solutions. However, we are experts and...
Hi
We have a small cloakroom that we want to put electric underfloor heating in, Was going for Prowire from Topps.
The floor is concrete I take it its best to put insulation boards down are the warmup ones that they do as good as any?
Also should these just be stuck down with tile adhesive or...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.