S
Spacey
Post the job here if you want
Tilers: find tiling jobs listed here - http://www.tilersforums.com/forums/tiling-jobs/
How many Karndean installer you got on here Dan ?
Electric UFH UFH help! Wrong SLC used - Tile Advice
Discuss UFH help! Wrong SLC used in the Tiling on Underfloor Heating area at TilersForums. The USA and UK Tiling Forum (Also now Aus, Canada, ROI, and more)
How many Karndean installer you got on here Dan ?
F
Flintstone
None!
What I do know is, I have been advised when fitting under floor heating for some one to lay karndean on that it needs to have 10mm of 2 part leveller.
What I do know is, I have been advised when fitting under floor heating for some one to lay karndean on that it needs to have 10mm of 2 part leveller.
J
J Sid
surely what even floor covering is going down the substrate needs to be solid and not likely to break up with time, be it tile Karndean or carpet. Or are we missing something?Should have mentioned your on the wrong forum really!
What you want is a Karndean installer not a tiler (no offence intended lads) Karndean installation and floor preparation for Karndean is a specialist craft. I'd recommend giving Karndean a ting They can point you in the right direction They have a list of trained fullt trained installers.
I'm on it but your a bit far away sorry
Good with this
You'll need it
S
Spacey
My point is that the entire job should be prepared and installed by a qualified Karndean installer from start to finish.
You can't possibly guarantee the finished floor if someone else has prepared the subfloor. I wouldn't.
In the event that there is any more issues you only have one person or company to deal with rather than two parties who would inevitably pass the buck to one and other. It's also peace of mind for the Client and the contractor
You can't possibly guarantee the finished floor if someone else has prepared the subfloor. I wouldn't.
In the event that there is any more issues you only have one person or company to deal with rather than two parties who would inevitably pass the buck to one and other. It's also peace of mind for the Client and the contractor
- Reaction score
- 863
Don't mind me while I bump up some older but good threads. If you can contribute to the thread, go ahead. But if it's nothing for you then don't reply and it'll soon drop off the What's New page etc.
Worth linking to our new forum structure while I'm doing stuff:-
Worth linking to our new forum structure while I'm doing stuff:-
Reply to UFH help! Wrong SLC used in the Tiling on Underfloor Heating area at TilersForums.com
Or checkout our tile courses and training forum or the Tile Blog / Latest Blog Posts
There are similar tiling threads here
This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.
Share This Page
New Tiling Questions
-
-
I'm Looking For This Tile Porcelanosa Nimbus Acero 33.3 cmX33.3cm
- Started by Euca12
- Replies: 0
-
-
-
I Have Spare Tiles Obsolete Ceramica de Elite: Venus grey with borders
- Started by Andrew Clarke
- Replies: 1
