Recent content by Andy Allen
-
Do we have any caravaners ?
bloody pikey...lol- Andy Allen
- Post #2
- Forum: Business Advice, Tilers Van Insurance etc
-
-
Hey, can you help me?
both are a nightmare and set very fast on ceramics I would go with bal standard set white or grey- Andy Allen
- Post #3
- Forum: Adhesive and Grout
-
Chipboard floor problem
most flexible adhesive, and only one I would use is bal single part fast flex, grout with bal wide joint grout mixed with GT1 admix 50/50 with water...- Andy Allen
- Post #7
- Forum: Canada
-
Acceptable standard
guess you should of checked the work before you paid !!- Andy Allen
- Post #2
- Forum: Canada
-
CaberFloor
if it's a floating floor I wouldn't touch it, you will be in for a whole world of hassle in the months that follow job...- Andy Allen
- Post #9
- Forum: Canada
-
client wont pay
job looks rough imo. the way the tiles are set don't help. as boggs has said it's not a pro finish more DIY at best.- Andy Allen
- Post #9
- Forum: Canada
-
-
'No More Ply' on old floorboards...
yes stagger them, it limits the stress points on the joins.- Andy Allen
- Post #10
- Forum: Canada
-
'No More Ply' on old floorboards...
definitely DON'T put the screws in when the adhesive has set, it needs to be screwed down while the adhesive is still wet...- Andy Allen
- Post #8
- Forum: Canada
-
'No More Ply' on old floorboards...
just tiled this floor, onto floorboards that were worse than yours using nmp... as it's all I could get during lockdown , and using the exact method I mention in my last post. the tiles were stuck down using bal single part fast flex, and grouted with bal wide joint grout with GT1 admix.- Andy Allen
- Post #5
- Forum: Canada
-
'No More Ply' on old floorboards...
can't say I'm a fan of nmp, brittle crap imo, hardie board is much better, but as you already have it I would ditch there adhesive and stick it down with tile adhesive ( not ready mixed) use a 10mm trowel and 25mm screws this should take up the bow in the floor boards.- Andy Allen
- Post #3
- Forum: Canada
-
-
Grout Fine hairline cracks in grout - advice please
can you actually get a rapid setting tubbed adhesive??- Andy Allen
- Post #10
- Forum: Adhesive and Grout
-
How we all coping during lockdown.
same, tiled an empty house this week, first job since lockdown, and I ache all over now..lol. still struggling to get materials, but thinking of going back full time once the local suppliers re-open. will know more Sunday about the lockdown, hopefully it will be eased up a bit, still...- Andy Allen
- Post #2
- Forum: Canada
This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.
