jm2000

Hi..i have just taken delivery of 15 M2 of beige 200mmx200mm 12 thick travertine tiles...i have laid tile before but i want this to be perfect....i have never laid a natural product and wondered if any of you would give me some pointers.

Many thanks.

Jason

jm2000

Sorry if this is in the wrong forum.

Fred

I would use slow set white flexi adhesive if your not used to rapid set. All cuts need to be on a wet cutter, I find it cuts real nice.

When marking for cuts, use a pencil only, as a usual felt tip marker will soak into the trav. Make sure you seal twice before grouting, ensuring the sealer gets into any sides with rounded edges.

When grouting, angain I use flexi, do small areas and replace with clean water every wash. If you miss asome grout, don't panic. You can buy grime remover which will get rid of any so called lasting grout marks.

jm2000

Thanks Fred...kind of sh....g myself.

I see there are some tilers from the blackpool area...anyone fancy giving me a quote.

Grace'sDad

Hi Jason,

I've PM'd you. I've got a fair bit of experience with Travertine (especially the cheap crappy crumbly B&Q type!). If the quality of your stone is good, it really needn't be scary. I'll try and post some decent photos tomorrow in the gallery.

Cheers

Mark