JOTM November 2010.

[Richard Edwards]

Turner Kimberley Road. Pre works June 2010 007-En-Comp1.jpgTurner Kimberley Road. Pre works June 2010 006-En-Comp2.jpgBlack and White - matching hand-cuts - Nov 2010 014-En-Comp3.jpgBlack and White - matching hand-cuts - Nov 2010 010-En-Comp4.jpgBlack and White - matching hand-cuts - Nov 2010 006-En-Comp5.jpgBlack and White - matching hand-cuts - Nov 2010 001-Comp-En.jpgBlack and White - matching hand-cuts - Nov 2010 019-Com-En.jpgBlack and White - matching hand-cuts - Nov 2010 016-Comp-En.jpg

Here is my entry for November - The clients remit was (a) Remove old 1960/1970 ceramic black and white floor in the porch and rebuild the screed / substrate. (b) Clean the original Victorian floor in the hall - Black and White with minimal damage, seal, polish. (c) Create a new/replacement Victorian Floor in the porch to match or compliment the Original in the hall.

To be fair the original floor was not too bad and needed a really good clean and polish etc. I lifted the ceramic porch tiles and all the screed came up with it as it was basically sand with a half a shovel of cement and was nothing more than dust. So back the slab and remade the screed using two layers of multiflo with stone dust to bulk it up [total thickness 60mm]

Made some of the tiles required from longer / larger pieces as they were non std. Then sealed it and polished it to finish.

I've got a funny feeling that my neighbour [15m distant] Gooner is not going to like it but some of you guys might appreciate the work. The most important thing is the customer thinks its 'Fab'

[whitebeam]

Cracking work Richard

[Richard Edwards]

Hello Guys!!!!
This is my entry for this month
1 shower room and 1 bathroom, and still 1 shower room in progress, still have to do silicone and give proper clean
used Grey porcelain tiles 1000 x 600 in shower room, and 1000 x 400 in bathroom,
everywhere mitered edges, white glass will be in all the niches
hope you like it!!!!
Thanks
Attachment 20076Attachment 20077

Super workmanship Don - you cannot beat external joints using mitres - proper job

[kilty55]

tommyzoom and richard both lovely work

[Phil Hobson]

Nice work Richard

[brian c]

nice work,really like the workmanship in all of them so well done.

[Dave]

No more entries please..