Quote:
Originally Posted by DavieA  Ah so i should be leaving a small joint between the tile and trim then using grout as per normal, will the grout not crack being in between the tile and a plastic trim?
And have u guys any sugestions on a good 150mm blade ( id Rather clean cuts than fast cuts) because if the tiles still chipped at the cut then even if i grout it will still look gash eh so i think a good blades a must .
I do scribe too
cheers |
Not the amount of grout you will be putting in. The gap shouldn't be huge. Certainly no bigger than your grout line and I would look for as little as possible, say 1mm.