View Single Post
Old 12-05-2008   #4
Dave
Tilers Forums Admin
 
Dave's Avatar
 
Acceleracers Track Mod Champion!
Join Date: May 2007
Location: co.durham
Posts: 12,040
Thanks: 972
Thanked 1,090 Times in 786 Posts
Dave is a splendid one to beholdDave is a splendid one to beholdDave is a splendid one to beholdDave is a splendid one to beholdDave is a splendid one to beholdDave is a splendid one to behold
View Dave's Photo Album
Default Re: Ceaning/restoring quarry tile floor

Lithofin do a great product for cleaning up Quarry's etc .........

Lithofin FZ Intensive Cleaner
Concentrated, high alkaline cleaner for all ceramic, porcelain and quarry tiles. Removes stubborn, ground in dirt often caused by years of foot traffic.

The Lithofin special product for finely finished, fully vitrified ceramic and porcelain tiles. This solvent free, alkali-based special cleaner has an in-depth cleaning action, removing particularly oily, greasy stains and also generally stubborn dirt.

Depending on the degree of dirt, use Lithofin FZ Intensive Cleaner neat or diluted up to 1:10 in cold or lukewarm water. Apply and distribute with a scrubbing brush, leaving to take effect for 10-20 minutes. Scrub over again several times during this period and do not allow to dry. Finally wipe up with a cloth, and if necessary rinse over the area again with clean water.

You get about 10-15m2/Ltr, in case of heavy soiling.

and about 100-200m2/Ltr, if diluted.............

Dave is online now   Reply With Quote
 
[Output: 11.43 Kb. compressed to 10.85 Kb. by saving 0.58 Kb. (5.03%)]