 Re: Installing UFH.... | |
We at Topps Preston recommend the insulation board if cable is directly onto concrete....the savings are quite staggering..the efficiency of the system is at maximum....Gaz
[IMG]http://www.warmup.co.uk/img/leer.gif[/IMG] [IMG]http://www.warmup.co.uk/images/spacer.gif[/IMG] [URL="http://www.warmup.co.uk/index.phtml"]Warmup Plc[/URL] > Insulation Board [IMG]http://www.warmup.co.uk/images/spacer.gif[/IMG] [B]Insulation Board[/B]
[IMG]http://www.warmup.co.uk/images/spacer_white.gif[/IMG][IMG]http://www.warmup.co.uk/images/spacer_white.gif[/IMG][IMG]http://www.warmup.co.uk/images/spacer_white.gif[/IMG][CENTER][IMG]http://www.warmup.co.uk/images/insulation-board.gif[/IMG][/CENTER]
[COLOR=#000000][B]
WARMUP INSULATION BOARD[/B] is a water resistant insulated tile backer board made of extruded polystyrene, faced on both sides with a fibreglass mesh embedded into a thin cement polymer mortar.[/COLOR]
[COLOR=#000000]These can be used as a structural tile backer board in the floor. It will withstand a load of 30 tonnes per square metre and is ideal for use with underfloor heating as it pushes the heat into the room, by not allowing heat to penetrate down into the concrete substrate below. As a wall tile backer board, tiles can be fixed directly on to the surface without prior preparation and, being totally waterproof, which is ideal for use in bathrooms or showers.[/COLOR]
[COLOR=#000000][B]Warmup Insulation Boards[/B] will save you money when used in conjunction with undertile heating by acting as a very efficient thermal barrier. It reflects the heat upwards into the floor tile instead of allowing heat to warm up the concrete slab below. By using Warmup Insulation Board you will find that after switching on your heating, your floor tiles will warm up in about 10-15 minutes. Without insulation boards it could take anything from 2-3 hours, or more.....Gaz[/COLOR] |