Exactly the type of product that Acousti-bond is designed for use with is regupol products.....dave..
Regupol 3912
Regupol 3912 is a compound and dampening pad made from a combination of PUR bound polyether foam and rubber granules.
Regupol 3912 is an acoustic underlaying material which helps to provide impact insulation for various types of floor finishes, for both residential and commercial applications.
Suitable for new build and refurbishment projects.
Roll width: 1.00m
Roll length: 15.00m
Material Thickness: 6mm
Laying: Convex side upwards
Compliance Tested to: Document E 2003
Regupol 4515
Regupol 4515 is a tough, durable acoustic underlay material to attenuate impact sound at source. It can be bonded to all types of base floors using an approved adhesive.
It is suitable for all floor finishes including ceramic tiles, sheet vinyl & vinyl tiles, wood and laminates, carpet & marmoleum/linoleum.
Roll width: 1.00m
Roll length: 18.00m
Material Thickness: 3mm & 4.5mm
Compliance Tested to: Document E 2003
Regupol is a sound insulation material used for underfloor impact sound reduction. It is made from recycled rubber and cork with a polyurethane binder, and is suitable for use under most floor finishes, as well as between structural floor elements. Regupol is an excellent use of recycled rubber. It is supplied in rolls of 3mm and 5mm thicknesses and is easy to install. It is temperature resistant from - 40 °C up to +110°C. Regupol can be used to reduce noise on stairs (5mm recommended) and impact sound from hard floor finishes. It can be installed in strips on top of joists, or in rolls between floor elements to minimise the transmission of impact noise from above to below. It can also be used as a carpet underlay.