GazTech

I would place tile to be cut on top of fixed one face up....push it toward the wall parallel to the fixed tile by 7mm by eye......then place another on top against the wall (to be cut against) and mark the tile to be cut off the back edge of it....If the angle is quite fierce or tapered,then use an off cut about an inch wide, the full length of a tile and simply mark your tile at both ends....it's quicer than with a tape and very accurate....Gaz

[B]"[I][COLOR=darkgreen]The bitterness of poor quality remains long after the sweetness of low price is forgotten[/COLOR][/I]"[/B]