 Re: Need advice on corner edge of shower seat | |
Hi Stuart,water will fall off your seating arrangement with very little fall,raise the back edge tiles to about 7/8mm.As regards the bullnose trim on the front edge,have this flush with the top set of tiles or( the seat)...therefore there will not be a lip to trap any water and allow the flow over the top and into shower base.Recommended adhesive(presuming seat made of MDF or PLY)Bal Mosaic Fix and Bal superflex wall grout.All 3 edges where the seat meets the tiled walls should be siliconed recommended Bal Microseal......Gaz |